User's Manual

Automatic wireless setup

1. If you prefer, you can change the name of your Contour 200i Air by typing the name (e.g.

‘Lounge Contour’) in the Product Name box and clicking Update. This is this name that you

will see on your network and in iTunes or on your Apple device.

2. Select the name of your own wireless network from the Network drop-down list. The

encryption method will automatically be determined by Contour 200i Air.

3. If required, enter the security key used by your network in the box below.

4. Click Connect. The Status LED will then ﬂash red to indicate that Contour 200i Air is

resetting. If Contour 200i Air connects to the network successfully, the Status LED will be

solid White after it has ﬁnished rebooting.

Connection tab

The wireless settings on the Contour 200i Air can be conﬁgured automatically or manually. We

recommend trying the automatic conﬁguration ﬁrst as this should work for the majority of home

Wi-Fi networks.

Note: We recommend that you contact your IT department before attempting to connect Contour

200i Air to a corporate wireless network.