User's Manual

Stage 2: Adding Contour 200i Air to your wireless network

Once you have established the temporary connection between your setup device and Contour

200i Air, you can add it to your wireless network as follows:

1. In your setup device’s web browser, enter the following in the address bar:

http://192.168.1.12

2. The main conﬁguration web page will display:

3. The Contour 200i Air main conﬁguration page features three tabs. In most cases, you only

need to conﬁgure the settings on the Connection tab. The other available tabs are:

Advanced The Advanced tab opens the Manual Network Setup page.

Status The Status tab opens the Status information page. This page displays

information about the ﬁrmware and the wireless connection status.