User's Manual

10
Discover EVOKE Flow EVOKE Flow Owner’s Manual v1.0
1.4 Overview of controls and sensors
1 Context-sensitive buttons. The function
is displayed on screen above the relevant
button and changes depending on the
current screen.
2
Back key (
). Tap to display the Source
screen.Tap when browsing stations to
go back up to the previous list. Tap in
the Options menu to go back up to the
previous screen.
3
Volume/mute dial. Rotate right and left to
increase and decrease the volume. Push
to mute the audio and push again to un-
mute.
4
Select dial. Rotate to browse the current
list of items/options and push in to
select. Push in to pause a media track or
podcast.
5
Standby touch key (
). Tap followed
by O Ok to switch the radio on; do this
again to switch the radio into standby (or
off if powered by a ChargePAK E1).
6
SnoozeHandle
®
. Tap to snooze the alarm
for 9 minutes. Grip and hold to brighten
the display to maximum brightness for 3
seconds (mains power only).
7
Light sensor. Adjusts the display
brightness according to the light levels in
your room (when the Brightness level is
set to ‘Automatic’). Make sure the sensor
is not covered or blocked.