Model No. IMTL94106.0 Serial No. Write the serial number in the space above for future reference. USER'S MANUAL Serial Number Decal QUESTIONS? As a manufacturer, we are committed to providing complete customer satisfaction. If you have questions, or if parts are damaged or missing, PLEASE CONTACT OUR CUSTOMER SERVICE DEPARTMENT DIRECTLY. CALL TOLL-FREE: 1-800-753-4645 Mon.–Fri., 6 a.m.–6 p.m. MST ON THE WEB: www.iconservice.
TABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the following important precautions and information before operating the treadmill. 1. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions. 11. Failure to use a properly functioning surge suppressor could result in damage to the control system of the treadmill.
20. Do not attempt to raise, lower, or move the treadmill until it is properly assembled. (See ASSEMBLY on page 7, and HOW TO FOLD AND MOVE THE TREADMILL on page 22.) You must be able to safely lift 45 pounds (20 kg) to raise, lower, or move the treadmill. 27. An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits.
Power Lines Ground Clamp Service Entrance Conductors Standoff Insulators Mast To External Antenna Terminal of Treadmill Service Entrance Equipment Power Service Grounding Electrode System (e.g. Interior Metal Water Pipe) Antenna Lead-in Wire Ground Wire Antenna Discharge Unit Ground Wire Ground Clamps Bonding Jumper Ground Clamps Optional Antenna Grounding Electrode Driven 8 Feet (2.44m) Into The Earth (If Required By Local Codes). See NEC Section 810–21 (f).
BEFORE YOU BEGIN Congratulations for purchasing the IMAGE® ADVANCED 2200 treadmill. The ADVANCED 2200 treadmill offers an impressive array of features designed to help you achieve your fitness goals in the convenience of your home. From the advanced console to the cushioned walking platform, the ADVANCED 2200 treadmill is designed to make each workout more effective and enjoyable.
ASSEMBLY To hire an authorized service technician to assemble the treadmill, call toll-free 1-800-445-2480. Assembly requires two persons. Place the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until the treadmill is assembled. Note: The underside of the treadmill walking belt is coated with high-performance lubricant.
3. With the help of a second person, raise the treadmill Frame (55). Hold the Latch Housing (68) and the Latch Housing Cover (5) against the sides of the Frame as shown. Loosely thread the two blunt-tipped 1/2” Screws (132) into the Latch Housing Cover and the Latch Housing as shown. Do not tighten the Screws yet. 3 Hole Remove the knob from the pin. Make sure that the collar and the spring are on the pin. The collar should be on the side of the spring shown.
Before the personal television can be used, you must connect an antenna, a 75 ohm CATV cable, or a VCR to the 75 ohm antenna terminal on the treadmill frame. Note: No antenna, cable, or adapter is included. HOW TO CONNECT AN ANTENNA 300 Ohm Flat Wire Indoor Antenna 1. See the drawing near the bottom of this page. Connect the 300 ohm flat wire from the antenna to a 300 ohm to 75 ohm adapter. 1. Place a VHF antenna in the desired location.
TREADMILL OPERATION THE PRE-LUBRICATED WALKING BELT Your treadmill features a walking belt coated with highperformance lubricant. IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking platform. Such substances will deteriorate the walking belt and cause excessive wear. HOW TO PLUG IN THE POWER CORD DANGER: Improper connection of the equipment-grounding conductor can result in an increased risk of electric shock.
Clip Key FEATURES OF THE CONSOLE treadmill to keep your heart rate near target heart rate settings while you exercise. The treadmill console offers an impressive array of features designed to help you get the most from your workouts. Whether you select the manual mode or a program, you can enjoy the shows of your choice on the personal television while you get in shape. When the manual mode of the console is selected, the speed and incline of the treadmill can be changed with the touch of a button.
If one of the numbered Speed buttons is pressed, the walking belt will gradually increase in speed until it reaches the selected speed setting. HOW TO TURN ON THE POWER Plug in the power cord (see page 10). Next, locate the reset/off circuit breaker near the power cord. Make sure that the circuit breaker is in the reset position. To stop the walking belt, press the Stop button. The time will begin to flash in the left display.
The right display—This display will show the distance that you have walked or run, the number of 1/4-mile laps you have completed, the speed of the walking belt, and the approximate numbers of calories and fat calories you have burned (see FAT BURNING on page 25). make sure that your hands are clean. Next, hold the handgrip pulse sensor with your palms resting on the metal contacts; avoid moving your hands.
The speed setting for the Current Segment first segment will be Column shown in the flashing Current Segment column of the matrix. (The incline settings are not shown in the matrix.) The speed settings for the next seven segments will be shown in the columns at the right. HOW TO USE A PRESET PROGRAM 1 Insert the key into the console. See HOW TO TURN ON THE POWER on page 12. 2 Select a preset program. To select a preset program, press the Speed & Incline button repeatedly.
To stop the program at any time, press the Stop button. The time will begin to flash in the left display. To restart the program, press the Start button or the Speed increase button. The walking belt will begin to move at 1 mph. When the next segment of the program begins, the treadmill will automatically adjust to the speed and incline settings for the next segment. 4 6 See step 7 on page 13. 7 When you are finished exercising, remove the key from the console.
See the matrix in the left Current Segment display. Each custom Column program is divided into one-minute segments. One speed setting and one incline setting can be programmed for each segment. The speed setting for the first segment will be shown in the flashing Current Segment column of the matrix. (The incline settings are not shown in the matrix.
ries of tones will sound, the speed setting and the incline setting will flash in the displays, and all speed settings will move one column to the left. The speed setting for the second segment will then be shown in the flashing Current Segment column and the treadmill will automatically adjust to the second speed and incline settings that you programmed previously. HOW TO USE A CUSTOM PROGRAM 1 Insert the key into the console. See HOW TO TURN ON THE POWER on page 12. 2 Select a custom program.
3 HOW TO USE A HEART RATE PROGRAM Enter your age. When a heart rate program is selected, the word “AGE” and the current age setting will begin to flash in the right display. If you have already entered your age, press the Enter button. If you have not entered your age, press the + or – button beside the Enter button to enter your age, and then press the Enter button. CAUTION: If you have heart problems, or if you are over 60 years of age and have been inactive, do not use the heart rate programs.
5 Hold the handgrip pulse sensor. During all heart rate programs, the console will regularly compare your heart rate to the target heart rate setting for the current segment. If your heart rate is too far below or above the target heart rate setting, the speed of the walking belt will automatically increase or decrease to bring your heart rate closer to the target heart rate setting.
HOW TO OPERATE THE PERSONAL TELEVISION HOW TO USE THE INFORMATION MODE The console features an information mode that allows you to view treadmill usage information, select a system of measurement for the console, and turn on and turn off the demo mode. The information mode also allows you to adjust the settings of the television and to save channels into the television’s memory.
3 your area. When no broadcast signal is detected on a channel, the channel will be skipped. When a broadcast signal is detected, the channel will be saved into memory and the next channel will be selected. This process will continue until the highest channel is reached. Do not remove the key while the television is scanning channels. Press the Power button again and add or delete channels.
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE 1 Before folding the treadmill, adjust the incline to the lowest position. If this is not done, the treadmill may be permanently damaged. Next, unplug the power cord. CAUTION: You must be able to safely lift 45 pounds (20 kg) to raise, lower, or move the treadmill. 1. Hold the treadmill in the locations shown at the right. To decrease the possibility of injury, bend your legs and keep your back straight.
TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, see the front cover of this manual. PROBLEM: The power does not turn on SOLUTION: a. Make sure that the power cord is plugged into a surge suppressor, and that the surge suppressor is plugged into a properly grounded outlet (see page 10).
PROBLEM: The walking belt is off-center or slips when walked on SOLUTION: a. If the walking belt is off-center, first remove the key and UNPLUG THE POWER CORD. If the walking belt has shifted to the left, use the hex key to turn the left rear roller bolt clockwise 1/2 of a turn; if the walking belt has shifted to the right, turn the bolt counterclockwise 1/2 of a turn. Be careful not to overtighten the walking belt. Then, plug in the power cord, insert the key, and run the treadmill for a few minutes.
EXERCISE GUIDELINES begin to use stored fat calories for energy. If your goal is to burn fat, adjust the speed or incline of the treadmill until your heart rate is near the lowest number in your training zone. WARNING: Before beginning this or any exercise program, consult your physician. This is especially important for individuals over the age of 35 or individuals with preexisting health problems.
PART LIST—Model No. IMTL94106.0 R1006A To locate the parts listed below, see the EXPLODED DRAWING attached in the center of this manual. Key No. Qty. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 2 1 1 2 1 1 2 1 2 4 1 1 9 2 2 1 1 1 2 2 10 1 4 1 1 4 4 1 2 1 1 2 2 1 1 1 1 1 1 45 1 2 12 20 1 1 1 2 1 1 Description Key No. Qty.
Key No. Qty. 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 2 1 1 2 2 1 1 6 2 1 1 5 1 2 1 12 1 1 Description Wheel Housing Power Cord Assembly TV Console Caution Decal Spring Plate Left Handgrip, Bottom Key/Clip Roller Star Washer/Foot Washer Idler Arm Washer Idler Pulley Access Door Outlet Bracket Star Washer Static Decal 1/2” Tek Screw Idler Pulley Bolt Spring Washer/Deck Rail Washer Console Back Latch Assembly Key No. Qty.
53 108 84 21 54 2 56 40 59 108 48 55 26 57 90 26 53 108 20 34 21 84 30 19 8 6 114 23 116 118 58 1 108 59 48 21 68 5 114 1 29 57 44 28 42 132 21 21 66 4 45 19 7 9 76 40 20 26 10 115 99 83 75 116 23 12 110 122 11 119 116 109 63 14 79 109 13 64 35 21 116 7 83 42 76 44 46 43 27 43 24 16 18 66 36 17 105 62 33 13 10 15 22 EXPLODED DRAWING—Model No. IMTL94106.
61 40 40 97 96 106 50 40 73 95 43 74 80 3 44 40 40 51 40 81 70 82 93 40 40 87 71 44 103 40 40 72 40 126 70 40 40 40 39 94 40 40 70 40 87 113 40 70 107 40 117 77 78 40 111 70 40 EXPLODED DRAWING—Model No. IMTL94106.
ORDERING REPLACEMENT PARTS To order replacement parts, see the front cover of this manual. To help us assist you, please be prepared to give the following information: • the MODEL NUMBER of the product (IMTL94106.0) • the NAME of the product (IMAGE ADVANCED 2200 treadmill) • the SERIAL NUMBER of the product (see the front cover of this manual) • the KEY NUMBER and DESCRIPTION of the part(s) (see the PART LIST on pages 26 and 27) LIMITED WARRANTY ICON Health & Fitness, Inc.
