® Patent Pending Model No. IMTL07800 E Serial No. Write the serial number in the space above for future reference. Serial Number Decal QUESTIONS? AS a manufacturer, we are com- to providing complete customer satisfaction, if you have questions, or if there are missing parts, we will guarantee complete satisfaction through direct assistance from our factory. mitted TO AVOID UNNECESSARY DELAYS, PLEASE CALL DIRECT TO OUR TOLL=FREE CUSTOMER HOT LINE.
TABLE OF CONTENTS IMPORTANT PRECAUTIONS ................................................................. BEFORE YOU BEGIN ....................................................................... ASSEMBLY ............................................................................... HOW TO USE THE HEART RATE MONITOR .................................................... OPERATION AND ADJUSTMENT ............................................................. TROUBLE-SHOOTING .....................................
13. Never move the walking belt while the power is turned off. Do not operate the treadmill if the power cord or plug is damaged, or if the treadmill is not working properly. (See BEFORE YOU BEGIN on page 4 if the treadmill is not working properly.) the off position when the treadmill is not in use. (See the drawing on page 4 for the location of the on/off switch.) 18. Inspect and tighten all parts of the treadmill every three months. 14.
BEFORE YOU BEGIN Thank you for selecting the new IMAGE R_' SE 7.8 treadmill. The IMAGE SE 7.8 treadmill combines advanced until 6 p.m. Mountain Time (excluding holidays). To help us assist you, please note the product model number and serial number before calling. The model number of the treadmill is IMTL07800.
ASSEMBLY Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included allen wrench tI and your own adjustable wrench __ . ............. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton.
HOW TO USE THE HEART RATE MONITOR HOW TO PUT ON THE HEART RATE MONITOR use, it may remain activated longer than necessary, draining the battery prematurely. The heart rate monitor consists of two components: the chest strap and the sensor unit (see the drawing below). Insert the tab on one end of the chest strap through the hole in one end of the sensor unit. Press the end of the sensor unit under the buckle on the chest strap. The tab should be almost flush with the front of the sensor unit.
OPERATION AND ADJUSTMENT THE PERFORMANT LUBE TM WALKING BELT This product is for use on a nominal 120-volt circuit, and has a grounding plug that looks like the plug illustrated in drawing 1 below. A temporary adapter that looks like the adapter illustrated in drawing 2 may be used to connect the surge suppressor to a 2-pole receptacle as shown in drawing 2 if a properly grounded outlet is not available. Your treadmill features a walking belt coated with PERFORMANT LUBE TM, a high-performance lubricant.
CONSOLE DIAGRAM Manual/Program indicators LED Track and Matrix Displays Displays ,&WAR N NG: motectyourselfandotl,e;sfromtie;
HOWTO B Follow your progress with the LED track and the four displays. USE THE MANUAL MODE The LED Track--When the manual mode is selected, the LED matrix will display a track. The track represents a distance of 1/4 mile. As Insert the key into the console. See GETTING STARTED on page 8. B Select the manual mode. When the key is O4 inserted, the manual mode will automatically be selected, as shown by the manual indicator.
CALORIES/PULSE disB play--Thisdisplay shows the approximate numbers of calories and [ /_=7L=7) o_ CALORmES / PULSE When the key is inserted, the manual mode will be selected, as shown by the manual indicator. To select one of the fat calories you have burned (see FAT BURNING on page 15). Every seven seconds, the display will change from one number to the other; the indicator will light when the number of fat calories is shown.
O If the program is too easy or too difficult, the intensity of the program can be adjusted. If a speed program is selected, press the SPEED buttons to adjust the maximum speed setting; if an incline program is selected, press the INCLINE buttons to adjust the maximum incline setting (see step 3 on page 10). Press the START button to start the program A moment after the START button is pressed, the walking belt will begin to move.
TROUBLE-SHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please call our Customer Service Department tollfree at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). PROBLEM: The power does not turn on SOLUTION: a.
PROBLEM: The walking belt is off-center SOLUTION: a. If the walking belt has shifted to the left, first remove the key and UNPLUG THE POWER CORD. Using the allen wrench, turn the left rear roller adjustment bolt clockwise, and the right bolt counterclockwise, 1/4 of a turn each. Be careful not to overtighten the walking belt. Plug in the power cord, insert the key and run the treadmill for a few minutes. Repeat until the walking belt is centered.
PROBLEM: The heart rate monitor does not function properly SOLUTION: a. If the heart rate monitor does not function properly, see HEART RATE MONITOR TROUBLESHOOTING on page 6. b, If the heart rate monitor still does not function properly, the battery should be changed. To replace the battery, locate the battery cover on the back of the sensor unit. Insert a coin into the slot in the cover and turn the cover counterclockwise the cover. Battery Cover to the "open" position.
CONDITIONING GUIDELINES Fat Burning WARNING:Before beginning To burn fat, you must exercise at a low intensity level for a sustained period of time. During the first few minutes of exercise, your body uses easily accessible carbohydrate calories for energy. Only after the first few minutes of exercise does your body begin to use stored fat calories for energy.
PART LIST--Model No. IMTL07800 Ro9ooA Note: To identify the parts listed below, refer to the EXPLODED DRAWING attached in the center of this manual. Key No. Qty.
EXPLODED DRAWING--Model No. IMTL07800 RogooA 25 64 68 92 26 65 3 52 90 i 27 \ 85 27 74 42 65 _40 48 25 62 14 32 15 87 34 51 27 15 14 8_9 77 55 49
ORDERING REPLACEMENT PARTS To order replacement parts, call our Customer Service Department toll-free at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). When ordering parts, please be prepared to give the following information: When requesting help or service, or ordering parts, please be prepared to provide the following information: • The MODEL NUMBER of the product (IMTL07800) • The NAME of the product (IMAGE ®SE 7.
