Operation Manual

1. Volume light indicator
2. Mute (speaker)
3. Volume up
4. Volume down
5. Hang up
6. Answer
7. mode selecon
8. Power switch /
Power light indicator
9. Mute (microphone)
10. Mode light indicator
11. USB port
12. D-IO (reserved)
MODE
LINK mode
USB mode
BLUETOOTH mode
PHONE mode
FAQ and troubleshoong
Can I Bluetooth connect my iMage A6 product to a computer or notebook for wireless operaons?
* You may Bluetooth connect your iMage A6 product to a smartphone or tablet. You need an
oponal iMage Dongle to connect with a computer or notebook for wireless operaons.
Noise of connuous explosion sound heard.
* The Bluetooth is a wireless technology very sensive with obstacles found in between devices
connected. The maximum transmission range of Bluetooth is 15m, in case there are no large
obstacles (e.g., walls) found in between the connected devices.
Failed to answer calls with my iMage A6 product
* Make sure that your iMage A6 product is set to the Bluetooth mode.
* Make sure that your iMage A6 product is paired with the desired device.
* Up the volume of your iMage A6 product.
Failed to pair my iMage A6 product
* You may have removed the pairing data during operaon; please refer to steps given in the
"Bluetooth mode" secon.
Mode selecon: USB
You may connect your iMage A6 product to your computer or notebook with a Micro-USB cable as
an external speakerphone of the laer.
How to connect:
1. Set iMage A6 to USB mode
2. Insert a USB cable to the Micro-USB port of your iMage A6 product
3. Wait for your computer to auto install required drivers (an Internet connecon is required for the
former in advance).
4. Set the sound input and output device of your computer to "iMage A6"
* To use your iMage A6 product with specific App, give proper sound I/O sengs for the laer in
advance.
Items included with the delivery of your product:
1. iMage A6 Bluetooth Conference Speakerphone x1
2. Micro USB cable x1
3. Operaon manual x1
* Note: These figures are measurements made in a lab environment; actual data may vary with
operang scenario.
iMage A6 Bluetooth Conference Speakerphone
Mode selecon: PHONE
You may connect oponal iMage PSTN BOX to local telephone line to use your iMage A6 product as
an add-on speaker.
How to connect:
1. Set your iMage A6 product to PHONE mode
2. Insert the RJ-11 connector of the local telephone line to the iMage PSTN BOX before pairing the
iMage A6 and iMage PSTN BOX.
* For more informaon on connecng to your iMage PSTN BOX, please refer to the operaon
manual included.
Mode selecon: Bluetooth
You may Bluetooth connect a mobile device (e.g., smartphone or tablet) to your iMage A6 product
as its external speaker and microphone.
How to connect:
1. Set iMage A6 in Bluetooth mode
2. Select "Search Bluetooth device" from the desired smartphone or tablet
3. Click on the "iMage A6_XX" opon in the device list to pair with your iMage A6 product.
4. Once the white mode indicator lights up steadily then the smartphone or tablet is paired
successfully with your iMage A6 product for HFP and A2DP support.
* In case the pairing operaon failed, remove earlier pairing data and pair the two again by the
following steps: press and hold the dial and hang up key at the same me unl you hear a beep
sound, wait for your iMage A6 product to re-set and re-start, re-pair the two again aerwards.
Get ready to use your product
Thank you for purchasing our iMage A6 Bluetooth Conference Speakerphone (iMage A6 BCS). Please
read this operang manual carefully before using your product.
I/O ports and buons
Mode LED light indicator
Charge your product in advance!
Please charge your iMage A6 by connecng it to a USB port. Please fully charge your product
before using it for the first me.
Power light indicator
Once powered on, one of the four mode indicators will light up in white color indicang that your
product is ON.
Charging: The power indicator lights up when charging is in process and flashes when your
product is fully charged. The laer is valid only when your product is OFF.
Charge: The power indicator flashes in red when baery charge is low and charging is required.
This indicator turns off when there is sll adequate charge le.
Note: Service life of the baery may get a lot shorter in case it remained without charge for
long me.
It's recommended to charge your product at least monthly.
Start using your product
Press and hold the power switch for 4 seconds to power on your iMage A6 product before pressing
the mode selecon key to access the desired mode.
Mode selecon: LINK (oponal)
You may connect oponal iMageTech M6 Wireless Speakerphone System/ iMage VC Adapter II/
iMage Dongle to sound I/O of video device to use your iMage A6 product as an external
speakerphone of the video player.
How to connect:
1. Set your iMage A6 product to LINK mode for pairing
2. Connect I/O connector of iMageTech M6 or iMage VC Adapter II to the sound I/O port of your
video device.
3. Power on your iMageTech M6 or iMage VC Adapter II for it to auto connect to iMage A6.
* For more informaon on connecng to your iMageTech M6 Wireless Speakerphone System or
iMage VC Adapter II device, please refer to the operang manual included.
* In case an iMage Dongle is available, you may connect it to the USB port of computer for auto
connecon with your iMage A6 product.
Dimensions: 140mm X 140mm X 45mm
Weight: 420±5g
Bluetooth version: 5.0 (HFP/HSP/A2DP/AVRCP)
Talk me: 10~12 hr.
Play me: 10~12 hr.
Standby me: 300~360 hr.
Baery capacity: 2600mAh
For Baery:
- Highest specified charging temperature: 55 ± 3 °C
- Lowest specified charging temperature: 0 ± 3 °C
Sound pickup angle: Omni-Direconal
Sound pickup range: 3m
Sound output: BlueTooth/Micro-USB
Sound input: BlueTooth/Micro-USB
Module type: GFSK
Working frequency: 2402MHz-2480MHz
Operang environment: 0~60℃
Specificaons
Contact Us!
Please contact us to get more help!
1. Website introducon
The site at address hp://www.iMagetech.com.tw can provide you with the latest support
informaon and online operang manual
2. Email address: [e-mail]
3. Tel: [phone]
4. Address: (114) 5
th
Floor, No. 16, Lane 15, Secon 6, Minquan East Road, Neihu District, Taipei City