User's Guide

Table Of Contents

Chapter 4: Operations and Adjustments

Auto Detect Zones

This function is used to automatically detect and add zones to the

configuration. Zones are added as traffic is detected. For more information,

see “Detect and Adjust Zones” on page 3-7

Calibrate Tab

This tab is used to verify vehicle counts in the defined zones and to adjust the

calibration of vehicle speeds and lengths.

Figure 4-2: Calibration Page

Table 4-1: Calibration Page Descriptions

Item Description

1 Click to save the values in the sensor’s memory.

2 Click to start or stop the operation.

3 Click to clear all values.

4 Click to view the last saved set of values.

5 Select to perform lane count verification.

6 Select to perform vehicle speed calibration.

(Table continues on the next page.)