User's Guide
Manuals
Brands
Image Sensing Systems Manuals
Electronics
Autoscope RTMS Echo, A700-1280
31
32
33
34
35
36
37
38
39
40
Table Of Contents
Table of Contents
Preface
Federal Communication Commission (FCC) Notices
Industry Canada (IC) Notices
FCC and IC ID Numbers
CE Certification
Chapter 1: Introduction
General
Features/Benefits
RTMS Echo Technical Specifications
Electromagnetic Interference
Firmware Upgrade Capability
Chapter 2: Pre-Installation Considerations
General
Safety Information
Power Considerations
Cabling Considerations
Breakout Boxes
Surge Suppression/Filtering
Connecting Power and Communications
Providing a Proper Ground
Placement in Side-Fired Highway Configuration
Height, Setback, Tilt Requirements
Guardrails and Barriers
Sunken Road and Roadside Walls
Elevated Roadway
Installing RTMS Echo on Sign Structures
Grade Differentials
Trees
Chapter 3: Sensor Installation & Setup
General
Safety Information
Installing the Sensor
Setting Up the Sensor
Logging in to the Sensor For the First Time
Aiming the Sensor
Detect and Adjust Zones
Verifying Vehicle Counts
Configure Settings
Chapter 4: Operations and Adjustments
General
Logging in to the RTMS Echo
Home Tab
1
2
3
4
5
6
7
Aim Tab
Zones Tab
Add a Zone
Edit a Zone
Remove a Zone
Auto Detect Zones
Calibrate Tab
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Optimizing Volume Count Accuracy
Condition A: Over/Under Count in Adjacent Zones
Condition B: Under Count in Near Zone
Condition C: Under Count in Far Zone
Condition D: Under Count in Several Zones
Condition E: Over Count in Several Zones
Condition F: Under Count in First Zone Past a Barrier
Speed Calibration
Length Calibration
Data Tab
Classification By Binned Speed Query
Classification by Length Query
Gap Average Query
Headway Average Query
Interval Data Query
Per-Vehicle Data Query
Speed 85th Percentile Query
Speed Average Query
Speed By Bin Query
Voltage Query
Volume Query
Log Tab
Settings Tab
Install Firmware
Local Area Network Setting
Wi-Fi Setting
Location Setting
Date and Time Setting
Traffic Data Storage Setting
Interval Data
Sx-300 Protocol Settings
Region Setting
Licensing
Backup/Restore Device Configuration
Download Diagnostics
Reboot Device
Chapter 4:
Operations and Adju
stments
RTMS Echo User Guide
©2019 Image Sensing Systems Inc.
4-4
Aim T
ab
This page is used to set the roll
and tilt of the sensor during the installation
process. F
or more inf
or
mation see
“Aiming the Sensor” on page
3-6
.
1
...
...
38
39
40
41
42
...
...
90
