User's Guide

RTMS Echo User Guide ©2019 Image Sensing Systems Inc. 4-1
Chapter 4: Operations and Adjustments
General
This chapter describes operations that can be performed and adjustments that
can be made after the RTMS Echo is installed and configured.
Logging in to the RTMS Echo
The following describes the procedure for logging in to the RTMS Echo. after
you have set the network parameters for the sensor (see “Local Area Network
Setting” on page 4-45).
1. Start your internet browser. Note, the screen shots shown below are taken
from Google Chrome and Firefox.
2. In the address field, type the IP address of the RTMS Echo.
3. Press Enter.
The RTMS Echo login window appears.
4. Enter the User name and Password. The defaults are:
• User name: admin
• Password: admin
5. Click Login.