User's Guide

RTMS Echo User Guide ©2019 Image Sensing Systems Inc. 3-1
Chapter 3: Sensor Installation & Setup
General
This chapter describes the procedure for installing and setting up the RTMS
Echo sensor.
Safety Information
Please review the following information before installation.
• Read all instructions before using.
• Heed all warnings in these instructions.
• Save these instructions for future reference.
• RTMS Echo units must be installed and adjusted in accordance with
the installation instructions contained in this manual.
• Use the RTMS Echo only for its intended purposes as described in this
manual. Changes or modifications not expressly approved by the
manufacturer could void the user's authority to operate the equipment.
• Consult Technical Support before using the RTMS Echo or other
RTMS Echo-related products for any purpose not expressly described
in this manual or any other RTMS Echo product manual. Do not use
the RTMS Echo to control or operate a gate-opening mechanism. Use
of the RTMS Echo for any unauthorized purpose may cause injury to
personnel or damage to equipment.
• For optimal accuracy, it is strongly recommended that only trained
personnel survey the sites and install all RTMS Echo-related products.
• For more information about our installation, surveying, and training
programs, contact your RTMS Echo sales representative.