FL Studio 20 Getting Started Manual

81
c. Check the Options menu to see if there is a check mark beside Enable MIDI Remote
Control. If not, click on it and see if you get the light now. If not, read on.
Master FLooper
d. Set Your MIDI Input Device. If the light is still not coming on when you turn knobs on your
controller, go into MIDI Settings (from the Options menu or by hitting F10). Check out
the Remote Control Input box. If you see the word "none" there, then you've got to select
an input. Typically, you will be presented with a number of choices, and you'll just have to
try them all to figure out which one is right.
e. Troubleshooting Checklist. If the red light is still not coming on when you turn the knobs
on your controller, here's a list of things you should check.
* Did you select the correct controller type in step b?
* Did you enable "Enable MIDI Remote Control" in step c?
* Did you select the correct MIDI input in step d?
* Is your USB controller detected OR are your MIDI In and Out cables reversed?
* Did you plug the controller into a power outlet?
Data input
indicator
Hey did you know you can use MORE than one
controller with FL Studio at the same time? Just
set each of your controllers to transmit on a
separate MIDI Channel (check the manuals that
come with your gear) and you can control multiple
Instrument Channels or the Playlist jump-to
markers…COOL!
Master FLooper: Yo, check it out. I need a
keyboard controller for FL Studio.
Computer Store Guy: QWERTY or AZERTY?