Instruction Manual

Î Press ENT Î All disc trays will open

5. Disc Info: Checks the capacity and space used on the disc(s) inside of the drive(s) of the duplicator.

Î Press ENT Î

6. Drive Info: Checks the make, model, firmware and the channel (port) of the drive(s) that are

connected to the duplicator controller.

Î Press ENT Î

Î Press i or j to select

different Drives

7. System Info: Checks the model number, buffer memory and firmware version of the

duplicator controller.

Î Press ENTÎ

8. Update BIOS: Updates the BIOS (firmware) of the duplicator controller.

Î Press ENTÎ

Î Insert update CD

and press ENT Î

Update completed and

eject disc Î

Î Re-boot system

9. Copy Count: Tracks the numbers of successful and failed copies made by the duplicator for both

CDs and DVDs. There are three (3) parts of this tool: Show Count (to display current copy counter),

Enable Counter (to turn the counter on or off) and Reset Counter (to clear counter).

1. Show Count

Î Press

ENT Î

Î Press

ENT Î

2. Enable Count

Î Press ENT Î

Î i or j and press ENT to select choice

3. Reset Counter