User guide

SATA HDD Duplicate Controller Manual
Press ENT to access option. By default it is set to No. Use the Up and Down arrow keys to choose
Yes.
Wipe all data.
Continue? No
Press ENT and the LCD will show the following info.
In Process
Elapsed 01:00
3.9 Overw r ite
Overwrite is used to do data-erase operations to the hard drive by command order from controller
itself. There are 3 sub-options: One pass (all 00 character), 3 pass (00, ff, random character) and
7 pass 5220.22-M (f6,00, ff, random, 00,ff,random c
haracter).This function will erase all HDD in
the tray (included Source tray), please be careful when use it.
Choose option 9 from the menu:
9. Overwrite
Press ENT to access option. By default it is One pass Use the Up and Down arrow keys to choose
other options.
9-01. Overwrite
One pass
Press ENT to access option. By default it is set to No. Use the Up and Down arrow keys to choose
Yes.
Wipe all data.
Continue? No
Press ENT and the LCD will show the following info.
In Process
Elapsed 01:00
9