Owner's manual

II. Function Introduction

2. Select 2.Disc Spanning and press .

3. Use / to enable or disable the copy function.

** Note:

Disc spanning can not be executed with Multidisc mode at the

same time. When both modes are enabled, the system will primary

execute disc spanning.

6-3. MultiDisc

The MultiDisc copy mode allows you to duplicate multiple discs from

one Flash device. You can enable or disable this mode here.

1. Select 6.Setup

and press .

2. Select 3.MultiDisc and press .

3 Use / to enable or disable the copy function.