User's Manual

Copyright©2005 ILY Enterprise, Inc. All rights reserved.
6
Hardware Connection with Hard Drive for CoolCopyD3
When the system connects with the hard drive, the hard drive must connect on the IDE 0 port
with the “Master” setting and the DVD-ROM must set at “Slave”.
Hardware Connection without Hard Drive for CoolCopyD3
Coolcopy 3
IDE 0
DVD
-
Pow
er
IDE 3
DVD+/
-
RW
IDE 2
DVD+/
-
RW
IDE 1
DVD+/
-
RW
Coolcopy 3
IDE 3
DVD+/
-
RW
IDE 2
DVD+
/
-
RW
IDE 1
DVD+
/
-
RW
IDE 0
DVD
-
ROM
Pow
er