User's Manual

Chapter 1 Introduction

1.1 Overview

People who want to create multiple copies of their DVDs or CDs usually take a long time to do so.

They might not have enough DVD+RW drives or they might be using their computers for some

other important tasks. The duplication process noticeably slows down a computer during the

burn process. Rather than sit at the computer for hours duplicating discs one at a time, it is much

more efficient to use a CoolCopyD DVD/CD duplication system.

The CoolCopyD DVD Duplicator system is a standalone duplicator and does not need to be

connected to a computer. It can duplicate discs accurately and quickly. With its multi-function

LCD panel, CoolCopyD DVD Duplicator is easy for any user to operate. It is a cost-efficient DVD-

R duplicator for audio, data, and video applications. The simple control panel is designed to

provide copy mode selection and copy operation.

1.2 Features

• Standalone IDE to IDE DVD Copy controller

• 2(CoolCopyD1AL(DVD-Backup)) / 4(CoolCopyD3) / 8(CoolCopyD7) /

16(CoolCopyD14)

independent IDE channel

• Self system diagnostics when power on

• Supports Hard Drive image

• Auto format detection

• User friendly interface with message rich LCD display

• Fast copies supports high speed DVD-RW writing mode

• Easy operation without software and training are required

• Firmware upgrade via DVD-ROM

1.3 Specification

Power requirement – voltage: 5VB+/- 5%

Current: 0.5A Max.

Environment - Temperature

Operating 0˚ C to 70˚ C

Storage -20˚ C to 85˚ C

Humidity - 15% to 90%

Models: CoolCopyD3/CoolCopyD7

Dimensions - Length: 200 mm

Width: 146.2 mm

Height: 42 mm

Connectors - 40-pin internal IDE connector

Cable (Optional) - Using ATA-66 (*Cable of length do not use longer than 46cm)

DVD Format - DVD-ROM (Mode1 & Mode2), DVD-ROM/XA (Mode2 form1 & form2),

DVD-DA,

Mixed-Mode, Video DVD, DVD-I, Karaoke CD, Photo CD (Single & Multi-

session), CD-Extra, HFS, CD Bridge, ISO9660, CD-R, and DVD+RW