User's Manual

Press ESC and the arrow to select the function.

Press ENT. The system will ask whether you want to

close. After this step, the data cannot be written onto the disc.

The LCD will show the message as the following screen:

When you are finished closing the session, the LCD will

show the following message:

4.11 Setup

This function allows you to change default settings. It is suggested that you use default setting for

optimal performance.

Press ENT button to enter the Setup function.

4.11.1 Language (optional)

Here are the available languages on the LCD: English, Traditional Chinese, Simplified Chinese

and Japanese.

Press ENT to change the setting and ESC to

exit.

4.11.2 CD Burn Speed

This setting controls the burning speed of CD writers. Default setting is “Auto,” which will use the

highest writing speed of the writers.

Press ENT to enter the setting.

Use arrow button to change the burning

speed then press ENT.

* The DVD Burn Speed lets you control the burning speed of DVD writers. Press ESC to enter

this function. Then press ENT to view the default setting, which is at maximum.

4.11.3 Read Speed

This function lets you control the reading speeds of target CDs.

Press ENT to enter the setting.

Use the arrow button to change the reading

10-04

Edit Track

Close Session

Close all disc’s

session? Yes

Closing Session

Please wait---

Closing

Complete

OK :3 Fail :0

11. Setup

11-01. Setup

Language

11-02. Setup

Burn Speed

24X

11-03. Setup

Read Speed

32X