Conversion Kit Instruction for Majestic II

ADJUSTING THE MINIMUM GAS FLOW

When installing the cooker you must check that the minimum gas flow of the burners on is correctly regulated. If the

type of gas is changed it is indispensable to adjust the minimum flow. The adjustment procedure is as follows.

Burners on the hob (g. 13)

1. Light one burner at a time and turn the flame up to maximum

2. Remove the knob of the corresponding gas tap and insert screwdriver in the screw as shown in figure 14a

or 14b (DUAL).

3. Turn the tap to minimum position.

4. Unscrew, turning to the left, to increase the flame, or screw to the right to decrease it

5. If a liquid gas is used (Butane - Propane), the regulating screw must be fully screwed in

By-pass

r egula-

ting

Figure 14b (DUAL)

AUX AUX

Figure 13 Figure 14a

LIGHTING THE BURNERS

The index above the knobs will help you to find the corresponding burner. Press the knob by turning it

counterclockwise and bring it to the ignition position; keep the knob pressed for about 5 seconds so that upon its

release the flame remains alight. In case of unsuccessful ignition wait 5 minutes before relighting and repeat the

operation.

SymbolSymbol

Function

off

maximum

minimum

index

lighting

OFF

Burners

Meduim

Large

Fish burner

Ring

Dual - Ring

TC/DCC

DUAL

Diameter Ø (cm)

10 ÷ 20

20 ÷ 24

oval pans (380 x 185)

22 ÷ 28

24 ÷ 30

Recommended pans according to burner size: