Leg Installation Instructions

7.
Remove racks and any other accessories
from the interior of the oven(s)
8. Tilt the range and set it down so its back is on the floor NOTE: In this step, no part of the range
should touch the floor directly and must be buffered by padding. This is to prevent damage to both
the range and the floor.
9. Attach the feet using
a phillips head screwdriver
to fasten the screws and
washers included with
the range.
Now that you have remove the dettachable parts and lessened the weight
of the range, lift the range off the packaging and set it on the floor