Specifications Sheet

ManualsBrandsILVE ManualsCooking Appliances90cm Induction Cooktop with Integrated Downdraft

BUILT-IN COOKTOPS

INDD94

90CM INDUCTION COOKTOP WITH

INTEGRATED DOWNDRAFT HOOD

Standard Option - Cooktop Colour

Black Glass

Using decades of experience in manufacturing range hoods meets

our innovative induction cooktop technology.

Functionality

Designed with a closing ap, that, when in operation allows for

optimum eciency and when closed, stops anything accidentally

falling inside and also prevents odours from escaping.

High-quality materials

The ap’s outer surface is made from the same glass as the hob,

creating a seamless look. All internal ducting components are made

from stainless steel.

Easy cleaning

The grease lter and the steel drip pan designed to catch grease

and liquids can be lifted out even with the ap in place. The glass

ap can also be removed completely to make it easier to clean

inside.

Safety

All liquids, including condensation, are collected in an internal tray

complete with drain valve. An electronic sensor warns when the

tray is full and, for safety reasons, stops motor operation until it has

been emptied.

Thoughtful motor location

The motor is located in the plinth, away from the user, making it

quieter and easier for the induction top to be serviced without

having to remove the hob from the bench top.

Adaptability and design freedom

The product can be installed in any base unit measuring at least

90cm wide and 60cm deep. It is telescopic in both height and

depth and, for deeper base units, the motor can easily be rotated

and located at the back.

Induction hob installation

The induction cooktop can be installed in a non-ush or ush

position.

Bridge zones

With this function you can to manage two larger areas of equal

size. The two zones are activated at the same time and controlled

simultaneously.

Residual heat indicator

The appliance is equipped with the residual heat indicator. The

cooking zone does not heat up directly, but through the return heat

transmitted by the pan. After switching o the zone, the display

shows a ‘H’ illuminated and, as long as it is active, you can use it to

heat up or defrost food.

Page 1/4

03082021

Summary of content (4 pages)

PAGE 1
BUILT-IN COOKTOPS 90CM INDUCTION COOKTOP WITH INTEGRATED DOWNDRAFT HOOD INDD94 Using decades of experience in manufacturing range hoods meets our innovative induction cooktop technology. Functionality Designed with a closing flap, that, when in operation allows for optimum efficiency and when closed, stops anything accidentally falling inside and also prevents odours from escaping. High-quality materials The flap’s outer surface is made from the same glass as the hob, creating a seamless look.
PAGE 2
BUILT-IN COOKTOPS 90CM INDUCTION COOKTOP WITH INTEGRATED DOWNDRAFT HOOD INDD94 Pause function and recall By touching a key both the heating and the timer are locked, by touching the same key the initial conditions are restored. Pots detector If there are no pots on the cooking zone, when the appliance is switched on heat will not be activated. If, in 10 minutes time, you place the pan on the cooking zone, the zone will detect it and switches on to the set level.
PAGE 3
BUILT-IN COOKTOPS 90CM INDUCTION COOKTOP WITH INTEGRATED DOWNDRAFT HOOD INDD94 INDD94 90CM INDUCTION COOKTOP & HOOD FINISH • Black ceramic glass FEATURES • • • • • • • • • • Touch control operation 9 power levels Pause & Recall mode Keep warm option Automatic pot detection Fast automatic heating will reach cooking temperature quicker Minute minder: facilitates a timer to alert cooking time and over cooking Open & Close hood flap made from black glass Easy removable catchment tray Creative motor design
PAGE 4
BUILT-IN COOKTOPS 90CM INDUCTION COOKTOP WITH INTEGRATED DOWNDRAFT HOOD INDD94 Pictured: with front & rear location motor Pictured: ducted version Pictured: in-recirculated mode Pictured: ducted with plasma filter Filtering mode Turning into filtering mode is very easy and affordable. A regenerable active charcoal filter kit is available and can be inserted into the base For installation specifications, please consult with ILVE.