Instructions / Assembly

OWNER′S MANUAL
2
1. When the product is placed on a live tree, the tree should be well maintained and fresh. Do not place on live trees in
which the needles are brown or break off easily. Keep the tree holder filled with water.
2. If the product is placed on a tree, the tree should be well secured and stable.
3. Before using or reusing, inspect the product carefully. Discard any products that have cut, damaged or frayed wire
insulation or cords, cracks in the lampholders or enclosures, loose connections, or exposed copper wire.
4. When not in use, store in a cool, dry location protected from sunlight.
USE & CARE INSTRUCTIONS
SETUP INSTRUCTIONS
1. Understand your product.
2. Hang the product at your desired spot and plug it in to the wall outlet.
2. Make sure connectors are fully inserted and any connector rings are twisted until completely secured such that the rings can no
longer be turned and the two portions of the connectors are completely assembled.
3. The lighting string is rated 6.7W (0.23A). Do not overload. To avoid the risk of fire or personal injury, do not exceed the
maximum allowable electrical load.
Giant Snowflake LED Lights
Rated Wattage: 6.7W (0.23A), Total Wattage: 7.9 Watts
This product is not extendable. Do not connect with other light products.
AC Adapter
Input: 120V/60Hz, 0.25A
Output: DC 29V, 0.45A
Adapter Controller
3. For best signal quality/reception, make sure
the controller is placed on a raised area free
of obstacles.
TIP: Simply use the remote control to
enjoy the color spectacle. Please see
REMOTE CONTROL INSTRUCTIONS.