Instructions / Assembly

OWNER′S MANUAL
2
1. Before using or reusing, inspect the product carefully. Discard any products that have cut, damaged or frayed wire
insulation or cords, cracks in the lampholders or enclosures, loose connections, or exposed copper wire.
2. When not in use, store in a cool, dry location protected from sunlight.
USE AND CARE INSTRUCTIONS
EXTENDER KIT SETUP INSTRUCTIONS
Mix-and-Match within the same series for Extra Fun!
This product is connectable with other Color Blast
™
Type B LED Lights. Simply calculate the Rated Wattage of all
connected products and create your own light show.
IMPORTANT: The total Rated Wattage of all connected products should not exceed the Maximum Wattage Capacity of
a single product.
SETUP INSTRUCTIONS
2. Lay the product in a straight line on a flat surface. Identify
all parts as indicated below.
1. Take the product out from the box.
Insert ground stakes into LED lights.
3. Push the ground stake into the ground (soil/lawn)
at your desired spot.
4. Plug it in to the wall outlet.
Example:
(1) Max. Watt Capacity of Product A: 10.0W
(2) Rated Wattage of Product A: 3.1W
(3) Rated Wattage of Product B: 4.2W
Then a feasible connection can be:
A x 1 + B x 1
(3.1W) + (4.2W) = 7.3W
7.3W < 10W
Power Adaptor
Controller
End-to-End Connector
Ground Stake x 3