Instructions / Assembly

OWNER′S MANUAL
3
EXTENDER KIT SETUP INSTRUCTIONS
2. Unlock the lock nut, and pull apart the plugs to reveal
the male connector.
3. Save the power adapter for future use.
5. Locate the add-on connector of the second kit.
Open the protective cap to reveal the female
connector.
7. Push the ground stake into the ground (soil/lawn) at
your desired spot.
4. Take the second kit out from the box, and insert ground
stakes into LED lights.
6. Connect the two kits together. Tighten the lock nut to
secure the connection.
1. Locate the extension cord and ground stakes of
the first kit.
8. Plug it in to the wall outlet.
Ground Stake x 3
* You can use or remove the extension cord as you need
9. For best signal quality/reception, make sure
the controller is placed on a raised area free
of obstacles.
TIP: Simply use the remote control to
enjoy the color spectacle. Please see
REMOTE CONTROL INSTRUCTIONS.