Installation Guide

4OF4

INSTALLATION INSTRUCTIONS

STEP 4:

a. Remove the Socket Collar from the socket on the

Fixture Body . Then place the Shade over the Socket on

the Fixture Body as shown. Secure by threading the

Socket Collar onto the socket on the Fixture Body.

Hand-tighten until snug.

Fixture Body

Shade

Socket Collar

Fixture Body

Bulb Shield

Bulb

STYLE NUMBER: UM-TST0957C1

Socket

Your installation is completed now Restore electricity Retain this sheet for future reference.. .

STEP 5:

. This fixture uses clear G9 Halogen Bulbs (supplied).

Maximum 60 watts.

. Insert bulb and sit properly into place.

c. Screw Bulb Shield onto the Socket and hand tighten

until snug.

Do not touch the bulb with bare hands

use a cloth or glove when replacing bulb.

IMPORTANT:

CAUTION FOR BULB REPLACING

A. When replacing bulb, turn off power and allow lamp to cool. For safety purpose, wear gloves and eye protection.

B. If bulb is scratched or cracked, DO NOT use the lamp to avoid breakage during use or installation.

C. Use bulbs rated for the fixtures correct wattage and voltage.

D. Prevent the bulb from contacting liquid or combustible materials.