Installation Guide

4OF5
INSTALLATION INSTRUCTIONS
STYLE NUMBER: UM-TST0590K
STEP 4:
a. Pull the Supply Wires and Ground Wire up through the
Fixture Chain alternating links. Push the wires up
through the Small Fixture Loop into the outlet box.
Fixture Chain
Supply Wire and
Ground Wire
Small Fixture Loop
STEP 5:
a. Un-thread the Lock Ball and slide Lock Ball and Ceiling
Canopy down the Fixture Chain.
b. Push all slack fixture wire through Small Fixture Loop
into outlet box. Trim excess fixture wire leaving a
minimum of 6 in. Hanging out of the outlet box.
c. Refer to STEP 6 to connect the wires.
d. Re-attach the Ceiling Canopy as shown in STEP 2.
Fixture Chain
Supply Wire and
Ground Wire
Small Fixture Loop
STEP 6:
a. Connect the House Ground Wire to the Fixture Ground
Wire.
b. Connect the House White (or Ribbed) Wire to the
Fixture Supply Wire (White or Ribbed Side).
c. Connect the House Black (or Red) Wire to the Fixture
Supply Wire (Black or Smooth Side).
d. Wrap each connection with approved electrical tape
and carefully stuff all of the connected wires into the
Outlet Box.
WHITE OR RIBBED
BLACK (OR RED) WIRE
GROUND WIRE
WHITE OR RIBBED
BLACK OR SMOOTH
GROUND WIRE
FROM HOUSE
FROM HOUSE
FROM HOUSE
FROM FIXTURE
FROM FIXTURE
FROM FIXTURE
Use Wire Connectors (supplied) to connect the
wires.
Lock Ball