Installation Guide

3OF5

INSTALLATION INSTRUCTIONS

STYLE NUMBER: UM-TST0590K

STEP 1:

a. Secure the to the outlet box (not

included) with Outlet Box Screws. Tighten until snug.

Crossbar Assembly

Crossbar

Outlet Box

Outlet Box Screw

STEP 2:

a. Remove the pre-assembled Lock Ball from crossbar

assembly. Temporarily attach the Ceiling Canopy to the

pre-assembled nipple on the crossbar assembly,

securing with Lock Ball. If the ceiling canopy is not

snug against the ceiling, remove it from the Crossbar

Assembly and adjust the length of the preassembled

Nipple by unscrewing the pre-assembled hex nut.

Screw the nipple in or out of the crossbar until the

correct length is achieved, then re-attach the Ceiling

Canopy.

STEP 3:

a. Adjust the Fixture Chain to your desired length by

removing the links if needed. You may need to use

pliers to open the chain links. If so, put a cloth over the

chain to protect the finish from the pliers.

b. Attach one end of the Fixture Chain onto the Small

Fixture Loop with a Quick Link Connector and then

attach the other end of the Fixture Chain onto the

Fixture Loop on the top of the fixture with another Quick

Link Connector.

8’ ceiling: (2) 4” Fixture chain + (4) 2” H. Quick links

9’ ceiling: (2) 16” Fixture chain + (4) 2” H. Quick links

10’ ceiling: (2) 28” Fixture chain + (4) 2” H. Quick links

Suggested chain length for ceiling height:

Small Fixture Loop

Fixture Chain

Supply Wire and

Ground Wire

Quick Link

Nipple

Lock Ball

Ceiling Canopy

Hex Nut

Small Fixture Loop