Installation Guide

ManualsBrandsIllumina Direct ManualsOtherXyia 3-Light Polished Chrome Chandelier

ISSUED 09-2014

PACKAGE CONTENTS

1OF5

STYLE NUMBER: TST0590K

WARNING:

CAUTION:

● Before beginning the installation, turn off electricity at the circuit breaker box or the main fuse box by switching

off the circuit breaker or removing the fuse.

● These instructions are provided for your safety. It is very important that they are read completely before the

installation of your fixture. We strongly recommend that a professional electrician install the fixture.

● Disconnect fixture from the power source before replacing the bulb(s), making sure that bulb(s) had sufficient

time to cool down. DO NOT subject the lamp to any shock while lit as shattering of lamp may result.

● Do not touch the bulb with bare hands use a cloth or glove.

WARNINGS AND CAUTIONS

● Before beginning installation of product, make sure all parts are present. Compare parts with package contents

list and diagram above. If any part is missing or damaged, do not attempt to assemble, install or operate the

product. Contact customer service for replacement part.

● Estimated Assembly Time: 35 - 45 minutes

● (3) 100W Type-A medium base bulbs, Alternate (3) CFL bulb.

● : Flathead screwdriver, Phillips screwdriver, pliers, wire cutters, wire strippers, electrical tape,

safety glasses.

● 1-866-535-1869

● customerservice@illuminadirect.com

● www.illuminadirect.com

Bulb Recommended:

Tools Required

Phone #:

E-mail:

website:

PREPARATION

www.illuminadirect.com

1-866-535-1869

UM-TST0590K

PART

DESCRIPTION

QUANTITY

Socket Assembly

3pcs

Shade

1pc

Ceiling Canopy

Socket Collar

(Pre-assembled to SocketAssembly)

4pcs

1pc

3pcs

2pcs

Wire Connector

Outlet Box Screw

Crossbar Assembly

1pc

Green Ground Screw

()Pre-assembled to Crossbar

1pc

Fixture Chain

Quick Link

Summary of content (5 pages)

PAGE 1
www.illuminadirect.
PAGE 2
TST0590K FINISH: POLISHED CHROME 10” 4.5” 2” Overall Height 63” (Includes 36” Chain) 23.5” 4” 6” 5” 28” (3)100W medium base bulb (not Supplied) NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2" NO. PART NUMBER 1 G2577SH REPLACEMENT PART DESCRIPTION Shade REQ.
PAGE 3
INSTALLATION INSTRUCTIONS STYLE NUMBER: UM-TST0590K STEP 1: a. Secure the Crossbar Assembly to the outlet box (not included) with Outlet Box Screws. Tighten until snug. Outlet Box Crossbar Outlet Box Screw STEP 2: a. Remove the pre-assembled Lock Ball from crossbar assembly. Temporarily attach the Ceiling Canopy to the pre-assembled nipple on the crossbar assembly, securing with Lock Ball.
PAGE 4
INSTALLATION INSTRUCTIONS STYLE NUMBER: UM-TST0590K STEP 4: a. Pull the Supply Wires and Ground Wire up through the Fixture Chain alternating links. Push the wires up through the Small Fixture Loop into the outlet box. Small Fixture Loop Fixture Chain Supply Wire and Ground Wire STEP 5: a. Un-thread the Lock Ball and slide Lock Ball and Ceiling Canopy down the Fixture Chain. b. Push all slack fixture wire through Small Fixture Loop into outlet box. Trim excess fixture wire leaving a minimum of 6 in.
PAGE 5
INSTALLATION INSTRUCTIONS STYLE NUMBER: UM-TST0590K STEP 7: a. Remove the Socket Collar from the Socket on the Socket Assembly. Locate the Shade over the Socket as shown. Secure by threading the Socket Collar onto the Socket. Hand-tighten until snug. Socket Assembly Socket Shade Socket Collar STEP 8: a. Install correct bulbs referring to fixture markings and/or labels for maximum wattage. Your installation is completed now. Restore electricity. Retain this sheet for future reference.