Installation Guide

4OF4
INSTALLATION INSTRUCTIONS
STYLE NUMBER: UM-TST0092E
STEP 4:
a. Carefully fit the Post Fitter over the end of the Post (not
supplied), making sure the Post Fitter is fully seated.
b. Mark the drill point for the (2) Mounting Screws, using
(2) Mounting Holes as reference. After marking hole
locations, remove Fixture from Post and drill 1/16” pilot
holes for screws.
c. Refer to Step 5 for wire connections.
d. Secure the Fixture to Post with (2) Mounting Screws.
Post Fitter
Post not supplied()
Mounting Screw
STEP 5:
a. Connect the House Ground Wire to the Fixture Ground
Wire.
b. Connect the House White (or Ribbed) Wire to the
Fixture Supply Wire (White or Ribbed Side).
c. Connect the House Black (or Red) Wire to the Fixture
Supply Wire (Black or Smooth Side).
d. Wrap each connection with approved electrical tape
and carefully stuff all of the connected wires into the
Outlet Box.
WHITE OR RIBBED
BLACK (OR RED) WIRE
GROUND WIRE
WHITE OR RIBBED
BLACK OR SMOOTH
GROUND WIRE
FROM HOUSE
FROM HOUSE
FROM HOUSE
FROM FIXTURE
FROM FIXTURE
FROM FIXTURE
Use Wire Connectors to connect the wires.
Your installation is completed now. Restore electricity. Retain this sheet for future reference.