Installation Guide

3OF4
INSTALLATION INSTRUCTIONS
STYLE NUMBER: UM-TST0092E
STEP 1:
A. Put the smooth side of glass outwards. Slip Glass
Panels inside of the Slot in the bottom edge of the
Cage.
b. Place Tabs onto the top edge of the Cage and Glass
Panel. Line up holes on Tabs and mounting holes on
the top edge of the Cage. Using screwdriver, thread
Short Screws into mounting holes on the top edge of
the Cage. Hand-tighten until snug.
Slot
Cage
Glass Panel
Short Screw
Tab
STEP 2:
a. Install the correct bulb referring to fixture markings and/or labels for maximum wattage.
STEP 3:
a. Place the Fixture Hood onto the top end of the Cage.
Line up Mounting Holes in the bottom of the Fixture
Hood and Holes on the top edge of the Cage. Using
screwdriver, thread Long Screw into the Mounting
Holes in the bottom of the Fixture Hood. Hand-tighten
until snug.
Cage
Fixture Hood
Long Screw
Mounting Hole
Hole