IC638B IC638W INSTRUCTION MANUAL Contents Warnings & Precautions.................................................................................... 2 Important Safety Instructions............................................................................. 3 In the Box & Features........................................................................................ 4 Powering the Unit.............................................................................................. 5 Setting the Time..........
Warnings and Precautions TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. This symbol, located on back or bottom of the unit, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Important Safety Instructions 1. Read these instructions. All the safety and operating instruction should be read before the product is operated. 2. Keep these instructions. The safety and operating instruction should be retained for future reference. 3. Heed all warnings. All warning on the product and in the operating instructions should be adhered to. 4. Follow all instructions. All operating and use instructions should be followed. 5.
In the Box • Clock Radio and Dock for iPod • Remote Control • iPod Docking Brackets • Documentation Features • Dock Connection for iPod compatible with iPod photo, iPod mini, iPod nano, and iPod with video.
Powering the Unit AC 120 V/60Hz Battery Information AA Battery AA Battery Batteries power for Back-up only. Battery back-up will save the clock and alarm times in case of a power outage.
Automatic Time Set 1. When the unit is plugged in to a standard AC Outlet (120V~60Hz) for the first time, it will automatically begin searching for the time. The letters “CT” will flash on the LCD display to indicate that the unit is searching for the time. If the letters “CT” do not appear on the LCD Display, press and hold the Standby/ AL Off/Reset Button for 5 seconds to reset the unit 2. To cancel the automatic time set during the search, press the Standby/AL Off/ Reset Button.
Setting the Alarm 1 Turn the unit off by pressing the Standby/AL Off/Reset Button. 2 Press and hold Alarm Set Button 1 or 2. Radio Alarm 1 Radio Alarm 2 The hour of the alarm time will begin to blink, indicating it can be changed. 3 Press the /HR/MIN/Tuner/ Buttons to adjust the blinking hour. Sleep Indicator 4 Press Alarm Set Button 1 or 2. The minute of the alarm time will begin to blink, indicating it can be changed.
Docking an iPod 1. Locate the numbered Bracket that fits the iPod that will be docked. Each included Bracket has a number on it, indicating which iPod model that bracket is compatible with. See the separate bracket chart page to identify which bracket is needed. 2. Snap the Bracket into place over the iPod connector in the Docking Station. All Brackets will only fit one way onto the Dock.
Playing an iPod 1. Connect an iPod to the Docking Station. 2. Press the Standby/AL Off/Reset Button to turn the unit on. 3. Press the iPod Button to switch to iPod Mode. 4. Press the Play/Pause Button to begin playing the docked iPod. 5. Press the Volume Buttons to increase or decrease the volume of the unit. 6. Press the /HR/MIN/Tuner/ Buttons to skip tracks. Press and hold the /HR/MIN/Tuner/ Buttons to search through individual tracks. Rock Equalizer Indicator iPod Mode Indicator 7.
Tuning the AM and FM Radio 1 Turn the unit off by pressing the Standby/AL Off/Reset Button. 2 Press the Function Button to switch the unit to Radio Mode. (ST) MHz Rock 3 Press the Stop/Band Button to switch between AM and FM radio. Equalizer Indicator 4 Press the /HR/MIN/Tuner/ Buttons to tune the AM or FM radio. 5 Adjust the Wire FM Antenna to improve FM reception. Radio Band To improve AM reception, adjust the position of the unit, as the AM Antenna is built-in. 6.
Saving an AM/FM Radio Station to the Station Presets 1 Select an AM or FM Radio station using the /HR/MIN/Tuner/ Buttons. 2 Press the MEM/CLK Set Button. MEM 3 Press the Play/Pause/M+ Button to change the preset number. 4 Press the MEM/CLK Set Button to save the current AM or FM radio station to the selected preset number. 5 In Radio Mode, press the Play/Pause/ M+ Button to cycle up through the preset radio stations.
Auxiliary Output: Connecting to an Television When connecting two products using an RCA Cable, match the colored ports with the same colored connection. (Red to Red, White to White, and Yellow to Yellow) 1. Plug one end of a 3.5 mm Cable (not included) or a 3.5 mm to RCA Cable (not included) into the AUX (Auxiliary) Output on the unit. 2. Plug the other end of the 3.5 mm Cable into the audio input/line input on a television or stereo system. 3.
Auxiliary Input: Connecting to an Mp3 Player When connecting two products using an RCA Cable, match the colored ports with the same colored connection. (Red to Red, White to White, and Yellow to Yellow) 1. Plug one end of a 3.5 mm Cable (not included) or a 3.5 mm - RCA Cable (not included) into the AUX (Auxiliary) Input on the unit. 2. Plug the other end of the 3.5 mm Cable into the audio output/headphone output on an Mp3 Player or Other Audio Source. 3.
Location of Controls 8 1 9 2 3 4 10 STANDBY AL OFF/ RESET 11 5 6 12 7 13 14 15
Control Definitions 1 Docking Station Use the Dock as a connection for an iPod. 2 Display Button Press the Display Button to view the time on the LCD Display while listening to the AM or FM radio. 3 Standby/AL Off/Reset Button Press the Standby/AL Off/Reset Button to turn the unit off and on. When an alarm sounds, press the Standby/AL Off/Reset Button to turn the alarm off. Press and hold the Standby/AL Off/Reset Button for 5 seconds to reset the unit.
Location of Controls & Definitions 17 19 18 20 Control Definitions 17 Aux (Auxiliary) Output Use the Aux Output to play audio, on the unit, from a connected Mp3 player or other audio source. 18 Aux (Auxiliary) Input Use the Aux Input to play audio from the unit on a connected television or stereo system. 19 Dimmer Switch Adjust the brightness of the LCD Display to LO or HI. 20 Phones (Headphone) Output Use the Phones Output to play audio from the unit on a connected set of headphones.
Location of Controls 21 32 22 33 23 24 34 35 25 36 26 37 27 38 28 39 29 40 30 41 42 31
Control Definitions 21 Mute Button Press the Mute Button to mute the unit’s volume. 22 Standby/AL Off/Reset Button Press the Standby/AL Off/Reset Button to turn the unit off and on. When an alarm sounds, press the Standby/AL Off/Reset Button to turn the alarm off. 23 Play/Pause/M+ Button In iPod Mode, press the Play/Pause/M+ Button to play or pause media from an iPod. In Radio Mode, press the Play/Pause/M+ Button to cycle up through the preset radio stations.
Control Definitions 35 Menu ▲ Button Press the Menu ▲ Button to navigate through a docked iPod. 36 HR/MIN/TUN-UP Button In iPod Mode, press the HR/MIN/TUN-UP Button to skip to the next media file, or press and hold the HR/MIN/TUN-UP Button to search forward through an individual audio or video file. When setting the clock, press the HR/MIN/TUN-UP Button to adjust the hour and minute upward on the time. In Radio Mode, press the HR/MIN/TUN-UP Button to adjust the radio station upward.
Service Information Address Phone Fax Email Website 2116 Carr Street, St. Louis MO, 63106 1-314-621-2881 1-314-588-1805 customerservice@ilive.net www.ilive.net To download this Instruction Manual in English, Spanish, or French visit the Support section at www.ilive.net. Para descargar este manual de instrucción en inglés, español, o francés visite la sección de la ayuda en www.ilive.net. Pour télécharger ce manuel d’instruction en anglais, espagnol, ou le Français visitez la section de soutien à www.
