User’s Guide for Model ISBT789 v2282-01 For the most up-to-date version of this User’s Guide, go to: www.iLiveElectronics.
Safety Instructions & Warnings CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION RISQUE D' ÉLECTROCUTION NE PAS OUVRIR WARNING: To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
FCC Warnings approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Table of Contents Setup Features & Specifications - 5 Power - 5 Includes - 5 Orientation Top & Front View - 6 Source Mode Indicator LED - 6 Speaker Controls (Top) - 7 Speaker Inputs (Rear) - 7 Remote Functions & Controls - 8 Remote Battery - 8 Connecting Devices Initial Bluetooth Connection and Playing Audio - 9 Previously Connected Devices - 9 Troubleshooting - 9 Line In - 9 Stereo RCA Inputs (Aux In) & Coaxial Audio Input - 10 Optical Input - 11 Company Information Contact Information - 12 Internation
Setup Features & Specifications Includes • Wooden Table with built-in speakers • Remote control with 1 CR2025 battery pre-installed • Table can support up to 110lbs (50kg) • Optical audio cable • Bluetooth: range 60 ft. • AC/DC power adapter • 2 channel stereo sound • Assembly hardware and instructions • Digital volume control • Full-function remote • Optical audio input • Aux In (RCA stereo audio inputs) • Line In (3.
Orientation Top & Front View Controls Source Indicator LED (front) Speakers Shelf Source Mode Indicator LED STATUS 6 INDICATOR LIGHT Power Off Red Light Bluetooth Standby/Pairing Slow/Quick Flashing Blue Light Bluetooth Connected Solid Blue Light Optical Mode Orange Light Aux In (RCA) Mode White Light Coaxial Mode Purple Light Line In Mode Green Light
Speaker Controls (Top) Power/Source Press and hold to power the unit ON or OFF. Press to switch audio source to Bluetooth, Optical, Aux In, Coaxial, or Line In modes. Volume Press to adjust volume. Pair/Play/Pause Press and hold to begin pairing to a Bluetooth device. Press to play or pause audio (BLUETOOTH MODE). Speaker Inputs (Rear) DC Power Input Stereo RCA Audio Inputs (AUX IN) Coaxial Audio Input Optical Audio Input Line In (3.
Remote Functions & Controls Power Press to turn the unit ON or OFF. Mute Press to mute the volume. Press to switch to Bluetooth Mode. Optical Press to switch to Optical mode. Coaxial Press to switch to Coaxial mode. AUX Press to switch to Aux In (RCA) Mode. Line In Press to switch to Line In mode. Source Press to switch source mode. Standard, Talk, Movie, Music Press to change the equalizer mode. Remote Battery Remote control: requires 1 CR2025 button cell type battery (included).
Connecting Devices Initial Bluetooth Connection and Playing Audio 1. Power on the sound bar by pressing and holding the Power button. A voice will say, "Bluetooth," and the LED indicator will slowly flash blue. When pairing, remain within 3 feet of the Bluetooth device. 2. Using the controls on your Bluetooth device, select ISBT789 in the Bluetooth Settings to pair. If need be, refer to the user’s manual for your specific device for more information. 3.
Connecting Devices Stereo RCA Inputs (Aux In) & Coaxial Audio Input Requires RCA stereo audio cable (not included) or Coaxial audio cable (not included). When connecting RCA stereo audio plugs (Red/White), match them to their corresponding color coded ports. 1. Connect an RCA stereo audio cable to the Aux In ports on the sound bar and the RCA audio outputs on a television or other audio source. If using a Coaxial audio cable, connect it to the Coaxial In on the sound bar. 2.
Optical Input Requires an audio source with an Optical Audio Output and a Digital Optical Audio Cable (included). 1. Using a Digital Optical Audio Cable, connect the Optical Input on the sound bar to the Optical Output on your audio source (TV, amplifier, etc.). 2. Power ON the sound bar and press Optical on the remote or Source on the sound bar to select Optical Mode. A voice will announce the source mode and the indicator will turn orange. 3. On the connected audio source (TV, amplifier, etc.
Company Information Contact Information Warranty Website: www.iLiveElectronics.com For Warranty Information and the most up-to-date version of this User’s Guide, go to: Email Support: prodinfo@dpiinc.com Email Parts: partsinfo@dpiinc.com www.iLiveElectronics.com Phone Support: 1-888-999-4215 International Support To download this User’s Guide in English, Spanish, and French, or to get answers to frequently asked questions, visit the support section at: www.iLiveElectronics.
