37˝ HD Sound bar with Bluetooth Wireless User’s Guide for Model ITB259 v2270-01 For the most up-to-date version of this User’s Guide, go to: www.iLiveElectronics.
Safety Instructions & Warnings CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION RISQUE D' ÉLECTROCUTION NE PAS OUVRIR Warning: To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
FCC Warnings approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Table of Contents Setup Features & Specifications - 5 Power - 5 Remote Battery - 5 Includes - 5 Orientation Top View - 6 Source Mode Indicator LED - 6 Speaker Controls (Top) - 6 Rear View - 7 Speaker Inputs Detail (Rear) - 7 Remote Functions & Controls - 8 Connecting Devices Initial Bluetooth Connection and Playing Audio - 9 Previously Connected Devices - 9 Troubleshooting - 9 Line In - 9 Stereo RCA Inputs (Aux In) & Coaxial Audio Input - 10 Optical Input - 11 Company Information Contact Information - 1
Setup Features & Specifications Includes • 37" length • Remote control with 1 CR2025 battery pre-installed • Supports Bluetooth: range 60 ft. • Optical audio cable • 2 channel stereo sound • AC/DC power adapter • Digital volume control • Wall-mount hardware and instructions • Full-function remote • Optical audio input • Aux In (3.5mm audio input) • RCA stereo audio inputs • Coaxial audio input (3.
Orientation Top View Controls Source Indicator LED (front) Source Mode Indicator LED Status Indicator Light Power Off Red Light Bluetooth Standby/Pairing Slow/Quick Flashing Blue Light Bluetooth Connected Solid Blue Light Optical Mode Orange Light Aux In (RCA) Mode White Light Coaxial Mode Purple Light Line In Mode Green Light Speaker Controls (Top) Power/Source Press and hold to power the unit ON or OFF.
Rear View Wall Mount Pegs Speaker Inputs Speaker Inputs Detail (Rear) DC Power Input Stereo RCA Audio Inputs (AUX IN) Coaxial In Line In (3.
Remote Functions & Controls Power Press to turn the unit on or off. Mute Press to mute the volume. POWER MUTE Press to switch to Bluetooth Mode. Optical Press to switch to Optical mode. Coaxial Press to switch to Coaxial mode. AUX Press to switch to Aux In (RCA) Mode. AUX OPTICAL COAXIAL LINE IN SOURCE Line In Press to switch to Line In mode. Pair/Play/Pause In Bluetooth mode, press and hold to pair. Press to play or pause audio. Source Press to switch source mode.
Connecting Devices Initial Bluetooth Connection and Playing Audio 1. Power on the sound bar by pressing and holding the Power button. A voice will say, "Bluetooth," and the LED indicator will slowly flash blue. When pairing, remain within 3 feet of the Bluetooth device. 2. Using the controls on your Bluetooth device, select ITB259 in the Bluetooth Settings to pair. If need be, refer to the user’s manual for your specific device for more information. 3.
Connecting Devices Stereo RCA Inputs (Aux In) & Coaxial Audio Input Requires RCA stereo audio cable (not included) or Coaxial audio cable (not included). When connecting RCA stereo audio plugs (Red/White), match them to their corresponding color coded ports. 1. Connect an RCA stereo audio cable to the Aux In ports on the sound bar and the RCA audio outputs on a television or other audio source. If using a Coaxial audio cable, connect it to the Coaxial In on the sound bar. 2.
Optical Input Requires an audio source with an Optical Audio Output and a Digital Optical Audio Cable (included). 1. Using a Digital Optical Audio Cable, connect the Optical Input on the sound bar to the Optical Output on your audio source (TV, amplifier, etc.). 2. Power ON the sound bar and press Optical on the remote or Source on the sound bar to select Optical Mode. A voice will announce the source mode and the indicator will turn orange. 3. On the connected audio source (TV, amplifier, etc.
Company Information Contact Information Warranty Website: www.iLiveElectronics.com For Warranty Information and the most up-to-date version of this User’s Guide, go to: Email Support: prodinfo@dpiinc.com Email Parts: partsinfo@dpiinc.com www.iLiveElectronics.com Phone Support: 1-888-999-4215 International Support To download this User’s Guide in English, Spanish, and French, or to get answers to frequently asked questions, visit the support section at: www.iLiveElectronics.
