Manual

Report No.: C140428Z01-RP1
FCC ID: 2AAHXMXH-BT800 Page 6 of 60
This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.
3. TEST METHODOLOGY
3.1 DESCRIPTION OF TEST MODES
The EUT has been tested under operating condition.
Test program used to control the EUT for staying in continuous transmitting and
receiving mode is programmed.
The following test mode(s) were scanned during the preliminary test below 1G:
Test Item
Test mode Worse mode
Mode 1: Charge + Line in
Conducted Emission
Mode 2: Charge + play music with BT
Radiated Emission Mode 1: TX
Above 1G, Channel Low (2402MHz)Mid (2441MHz) and High (2480MHz) were
chosen for full testing for GFSK and 8DPSK.