Manual

ManualsBrandsiLike Electronics ManualsAudio EquipmentBluetooth Wireless Headset

Report No.: C140428Z01-RP1

Note: This report shall not be reproduced except in full, without the written approval of

Compliance Certification Services Inc. This document may be altered or revised by

Compliance Certification Services Inc. personnel only, and shall be noted in the revision

section of the document. The client should not use it to claim product endorsement by

TAF, A2LA, NVLAP, NIST or any government agencies. The test result of this report

relate only to the tested sample identified in this report.

FCC ID:

2AAHXMXH-BT800 Page 1 / 60

FCC 47 CFR PART 15 SUBPART C

TEST REPORT

For

Bluetooth WIRELESS HEADSET

Model: MXH-BT800,BM-886

Brand: N/A

Test Report Number:

C140428Z01-RP1

Prepared for

iLike Electronics Co.,Ltd.

Industrial Areas of iLike,Ju Ling old village,Da Shui Keng,

Guanlan,Longhua New District,Shenzhen.China

Prepared by

COMPLIANCE CERTIFICATION SERVICES (SHENZHEN) INC.

No.10-1, Mingkeda Logistics Park, No.18, Huanguan South Rd.,

Guan Lan Town, Baoan District, Shenzhen China

TEL: 86-755-28055000

FAX: 86-755-28055221

Issued Date: May 19, 2014

检测

CNAS L4818

Summary of content (60 pages)

PAGE 1
Report No.: C140428Z01-RP1 FCC 47 CFR PART 15 SUBPART C TEST REPORT For Bluetooth WIRELESS HEADSET Model: MXH-BT800,BM-886 Brand: N/A Test Report Number: C140428Z01-RP1 Prepared for iLike Electronics Co.,Ltd. Industrial Areas of iLike,Ju Ling old village,Da Shui Keng, Guanlan,Longhua New District,Shenzhen.China Prepared by COMPLIANCE CERTIFICATION SERVICES (SHENZHEN) INC. No.10-1, Mingkeda Logistics Park, No.18, Huanguan South Rd.
PAGE 2
Report No.: C140428Z01-RP1 Revision History Rev. 00 Issue No. C140428Z01-RP1 FCC ID: 2AAHXMXH-BT800 Revisions Initial Issue Effect Page ALL Revised By Sinphy Xie Page 2 of 60 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.
PAGE 3
Report No.: C140428Z01-RP1 TABLE OF CONTENTS 1. TEST RESULT CERTIFICATION .....................................................................................4 2. EUT DESCRIPTION..........................................................................................................5 3. TEST METHODOLOGY....................................................................................................6 3.1 DESCRIPTION OF TEST MODES..........................................................................
PAGE 4
Report No.: C140428Z01-RP1 1. TEST RESULT CERTIFICATION Product: Bluetooth WIRELESS HEADSET Model: MXH-BT800,BM-886 Brand: N/A Tested: April 28~May 16, 2014 Applicant: iLike Electronics Co.,Ltd. Industrial Areas of iLike,Ju Ling old village,Da Shui Keng, Guanlan,Longhua New District,Shenzhen.China Manufacturer: iLike Electronics Co.,Ltd. Industrial Areas of iLike,Ju Ling old village,Da Shui Keng, Guanlan,Longhua New District,Shenzhen.
PAGE 5
Report No.: C140428Z01-RP1 2. EUT DESCRIPTION Product Bluetooth WIRELESS HEADSET Model Number MXH-BT800,BM-886 Brand They are the same product just different from product name. Model Discrepancy N/A Identify Number C140428Z01-RP1 Power Supply DC5V supplied by the notebook or DC3.7V supplied by the battery USB Cable Unshielded, 1.00m Audio Cable Unshielded, 0.90m Received Date April 28, 2014 Frequency Range 2402 ~ 2480 MHz Transmit Power GFSK : 6.79dBm 8DPSK : 6.
PAGE 6
Report No.: C140428Z01-RP1 3. TEST METHODOLOGY 3.1 DESCRIPTION OF TEST MODES The EUT has been tested under operating condition. Test program used to control the EUT for staying in continuous transmitting and receiving mode is programmed.
PAGE 7
Report No.: C140428Z01-RP1 4. FACILITIES AND ACCREDITATIONS 4.1 FACILITIES All measurement facilities used to collect the measurement data are located at No.10-1, Mingkeda Logistics Park, No.18, Huanguan South Rd., Guan Lan Town, Baoan District, Shenzhen, China The sites are constructed in conformance with the requirements of ANSI C63.4:2009, ANSI C63.7 and CISPR Publication 22. All receiving equipment conforms to CISPR Publication 16-1, “Radio Interference Measuring Apparatus and Measurement Methods.” 4.
PAGE 8
Report No.: C140428Z01-RP1 5. SETUP OF EQUIPMENT UNDER TEST 5.1 SETUP CONFIGURATION OF EUT See test photographs attached in Appendix 1 for the actual connections between EUT and support equipment. 5.2 SUPPORT EQUIPMENT No. Equipment Model No. Serial No. FCC ID Brand Data Cable Power Cord 1 Notebook 992F2VG 62P7043 N/A IBM N/A Unshielded 2.50m 2 PC DCSM1F B8AC6F2474CE N/A DELL N/A Unshielded 1.50m 3 LCD U3011T CNOPH5NY744450 97425L N/A DELL Shielded 1.50m Unshielded 1.
PAGE 9
Report No.: C140428Z01-RP1 6. FCC PART 15.247 REQUIREMENTS 6.1 20DB BANDWIDTH None; for reporting purpose only. MEASUREMENT EQUIPMENT USED Name of Equipment Manufacturer Model Spectrum Analyzer Agilent E4446A Serial Number Last Calibration US44300399 03/01/2014 Due Calibration 03/01/2015 Remark: Each piece of equipment is scheduled for calibration once a year. TEST CONFIGURATION EUT Spectrum Analyzer TEST PROCEDURE 1. Place the EUT on the table and set it in the transmitting mode. 2.
PAGE 10
Report No.: C140428Z01-RP1 Test plot GFSK 20dB Bandwidth(CH Low) 20dB Bandwidth (CH Mid) FCC ID: 2AAHXMXH-BT800 Page 10 of 60 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.
PAGE 11
Report No.: C140428Z01-RP1 20dB Bandwidth (CH High) 8DPSK 20dB Bandwidth (CH Low) FCC ID: 2AAHXMXH-BT800 Page 11 of 60 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.
PAGE 12
Report No.: C140428Z01-RP1 20dB Bandwidth (CH Mid) 20dB Bandwidth (CH High) FCC ID: 2AAHXMXH-BT800 Page 12 of 60 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.
PAGE 13
Report No.: C140428Z01-RP1 6.2 PEAK POWER LIMIT The maximum peak output power of the intentional radiator shall not exceed the following: 1. For frequency hopping systems operating in the 2400-2483.5 MHz band employing at least 75 non-overlapping hopping channels, and all frequency hopping systems in the 5725-5850 MHz band: 1 watt. For all other frequency hopping systems in the 2400-2483.5 MHz band: 0.125 watts. 2.
PAGE 14
Report No.: C140428Z01-RP1 TEST RESULTS No non-compliance noted Test Data GFSK Channel Low Mid High Frequency Reading Power Factor (MHz) (dBm) (dB) 2402 1.29 3.50 2441 2.64 3.50 2480 3.29 3.50 Output Power Output Power (dBm) (W) 0.00301 4.79 0.00411 6.14 0.00478 6.79 Limit (W) Result 1 PASS PASS PASS Frequency Reading Power Factor (MHz) (dBm) (dB) 2402 0.37 3.50 2441 2.18 3.50 2480 2.84 3.50 Output Power Output Power (dBm) (W) 0.00244 3.87 0.00370 5.68 0.00431 6.
PAGE 15
Report No.: C140428Z01-RP1 6.3 PEAK POWER SPECTRAL DENSITY LIMIT 1. For direct sequence systems, the peak power spectral density conducted from the intentional radiator to the antenna shall not be greater than 8dBm in any 3kHz band during any time interval of continuous transmission. 2. The direct sequence operating of the hybrid system, with the frequency hopping operation turned off, shall comply with the power density requirements of paragraph (d) of this section.
PAGE 16
Report No.: C140428Z01-RP1 6.4 BAND EDGES MEASUREMENT LIMIT According to §15.247(c), in any 100 kHz bandwidth outside the frequency bands in which the spread spectrum intentional radiator in operating, the radio frequency power that is produced by the intentional radiator shall be at least 20dB below that in the 100kHz bandwidth within the band that contains the highest level of the desired power, In addition, radiated emissions which fall in the restricted bands, as defined in §15.
PAGE 17
Report No.: C140428Z01-RP1 TEST PROCEDURE 1. The EUT is placed on a turntable, which is 0.8m above the ground plane. 2. The turntable shall be rotated for 360 degrees to determine the position of maximum emission level. 3. EUT is set 3m away from the receiving antenna, which is varied from 1m to 4m to find out the highest emission. 4.
PAGE 18
Report No.: C140428Z01-RP1 Test Data ( GFSK ) Band Edges (CH-Low) Detector mode: Peak Polarity: Vertical Detector mode: Average Polarity: Vertical No. Frequency (MHz) Reading (dBuV) Corrected (dB) Result (dBuV) Limit (dBuV) Margin (dB) Detector Antenna Pole 1 2390.0000 44.89 -6.60 51.49 74.00 -22.51 Peak Vertical 2 2390.0000 32.89 -6.60 39.49 54.00 -14.
PAGE 19
Report No.: C140428Z01-RP1 Detector mode: Peak Polarity: Horizontal Detector mode: Average Polarity: Horizontal No. Frequency (MHz) Reading (dBuV) Corrected (dB) Result (dBuV) Limit (dBuV) Margin (dB) Detector Antenna Pole 1 2390.0000 45.05 -6.60 51.65 74.00 -22.35 Peak Horizontal 2 2390.0000 32.92 -6.60 39.52 54.00 -14.
PAGE 20
Report No.: C140428Z01-RP1 Band Edges (CH-High) Detector mode: Peak Polarity: Vertical Detector mode: Average Polarity: Vertical No. Frequency (MHz) Reading (dBuV) Corrected (dB) Result (dBuV) Limit (dBuV) Margin (dB) Detector Antenna Pole 1 2483.5000 44.57 -6.24 50.81 74.00 -23.19 Peak Vertical 2 2483.5000 33.32 -6.24 39.56 54.00 -14.
PAGE 21
Report No.: C140428Z01-RP1 Detector mode: Peak Polarity: Horizontal Detector mode: Average Polarity: Horizontal No. Frequency (MHz) Reading (dBuV) Corrected (dB) Result (dBuV) Limit (dBuV) Margin (dB) Detector Antenna Pole 1 2483.5000 44.04 -6.24 50.28 74.00 -23.72 Peak Horizontal 2 2483.5000 33.17 -6.24 39.41 54.00 -14.
PAGE 22
Report No.: C140428Z01-RP1 8DPSK Band Edges (CH-Low) Detector mode: Peak Polarity: Vertical Detector mode: Average Polarity: Vertical No. Frequency (MHz) Reading (dBuV) Corrected (dB) Result (dBuV) Limit (dBuV) Margin (dB) Detector Antenna Pole 1 2390.0000 44.38 -6.60 50.98 74.00 -23.02 Peak Vertical 2 2390.0000 32.98 -6.60 39.58 54.00 -14.
PAGE 23
Report No.: C140428Z01-RP1 Detector mode: Peak Polarity: Horizontal Detector mode: Average Polarity: Horizontal No. Frequency (MHz) Reading (dBuV) Corrected (dB) Result (dBuV) Limit (dBuV) Margin (dB) Detector Antenna Pole 1 2390.0000 43.29 -6.60 49.89 74.00 -24.11 Peak Horizontal 2 2390.0000 33.10 -6.60 39.70 54.00 -14.
PAGE 24
Report No.: C140428Z01-RP1 Band Edges (CH-High) Detector mode: Peak Polarity: Vertical Detector mode: Average Polarity: Vertical No. Frequency (MHz) Reading (dBuV) Corrected (dB) Result (dBuV) Limit (dBuV) Margin (dB) Detector Antenna Pole 1 2483.5000 44.24 -6.24 50.48 74.00 -23.52 Peak Vertical 2 2483.5000 33.36 -6.24 39.60 54.00 -14.
PAGE 25
Report No.: C140428Z01-RP1 Detector mode: Peak Polarity: Horizontal Detector mode: Average Polarity: Horizontal No. Frequency (MHz) Reading (dBuV) Corrected (dB) Result (dBuV) Limit (dBuV) Margin (dB) Detector Antenna Pole 1 2483.5000 44.72 -6.24 50.96 74.00 -23.04 Peak Horizontal 2 2483.5000 33.21 -6.24 39.45 54.00 -14.
PAGE 26
Report No.: C140428Z01-RP1 6.5 FREQUENCY SEPARATION LIMIT According to §15.247(a)(1), Frequency hopping systems shall have hopping channel carrier frequencies separated by a minimum of 25 kHz or the 20 dB bandwidth of the hopping channel, whichever is greater. Alternatively, frequency hopping systems operating in the 2400-2483.
PAGE 27
Report No.: C140428Z01-RP1 GFSK Test Plot Measurement of Channel Separation 20 dB bandwidth(CH Low) FCC ID: 2AAHXMXH-BT800 Page 27 / 60 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.
PAGE 28
Report No.: C140428Z01-RP1 8DPSK Test Plot Measurement of Channel Separation 20 dB bandwidth(CH High) FCC ID: 2AAHXMXH-BT800 Page 28 / 60 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.
PAGE 29
Report No.: C140428Z01-RP1 6.6 NUMBER OF HOPPING FREQUENCY LIMIT According to §15.247(a)(1)(ii), Frequency hopping systems operating in the 2400MHz-2483.5 MHz bands shall use at least 15 hopping frequencies. MEASUREMENT EQUIPMENT USED Name of Equipment Manufacturer Spectrum Analyzer Agilent Last Model Serial Number Calibration E4446A US44300399 Due Calibration 03/01/2014 03/01/2015 Remark: Each piece of equipment is scheduled for calibration once a year.
PAGE 30
Report No.: C140428Z01-RP1 Test Plot ( GFSK ) Channel Number 2.400 GHz –2.4415 GHz 2.4415 GHz –2.4835 GHz FCC ID: 2AAHXMXH-BT800 Page 30 / 60 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.
PAGE 31
Report No.: C140428Z01-RP1 Test Plot (8DPSK ) Channel Number 2.400 GHz –2.4415 GHz 2.4415 GHz –2.4835 GHz FCC ID: 2AAHXMXH-BT800 Page 31 / 60 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.
PAGE 32
Report No.: C140428Z01-RP1 6.7 TIME OF OCCUPANCY (DWELL TIME) LIMIT According to §15.247(a)(1)(iii), Frequency hopping systems operating in the 2400MHz-2483.5 MHz bands. The average time of occupancy on any channels shall not greater than 0.4 s within a period 0.4 s multiplied by the number of hopping channels employed.
PAGE 33
Report No.: C140428Z01-RP1 TEST RESULTS No non-compliance noted Test Data GFSK DH 1 CH Mid: CH Mid 0.440* (1600/2)/79 * 31.6 = 140.800 (ms) Pulse Time Total of Dwell Period Time (ms) (ms) (s) 0.440 140.800 31.60 Limit (ms) Result 400.00 PASS Limit (ms) Result 400.00 PASS Limit (ms) Result 400.00 PASS DH 3 CH Mid: CH Mid 1.700* (1600/4)/79 * 31.6 = 272.000 (ms) Pulse Time Total of Dwell Period Time (ms) (ms) (s) 1.700 272.000 31.60 DH 5 CH Mid: CH Mid 2.958* (1600/6)/79 * 31.6 = 315.
PAGE 34
Report No.: C140428Z01-RP1 Test Data 8DPSK DH 1 CH Mid: CH Mid 0.457* (1600/2)/79 * 31.6 = 146.240 (ms) Pulse Time Total of Dwell Period Time (ms) (ms) (s) 0.457 146.240 31.60 Limit (ms) Result 400.00 PASS Limit (ms) Result 400.00 PASS Limit (ms) Result 400.00 PASS DH 3 CH Mid: CH Mid 1.705* (1600/4)/79 * 31.6 = 272.800 (ms) Pulse Time Total of Dwell Period Time (ms) (ms) (s) 1.705 272.800 31.60 DH 5 CH Mid: CH Mid 2.983* (1600/6)/79 * 31.6 = 318.
PAGE 35
Report No.: C140428Z01-RP1 Test Plot GFSK DH 1 (CH Mid) DH 3 (CH Mid) FCC ID: 2AAHXMXH-BT800 Page 35/60 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.
PAGE 36
Report No.: C140428Z01-RP1 DH 5 (CH Mid) FCC ID: 2AAHXMXH-BT800 Page 36 / 60 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.
PAGE 37
Report No.: C140428Z01-RP1 Test Plot 8DPSK DH 1 (CH Mid) DH 3 (CH Mid) FCC ID: 2AAHXMXH-BT800 Page 37 / 60 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.
PAGE 38
Report No.: C140428Z01-RP1 DH 5 (CH Mid) FCC ID: 2AAHXMXH-BT800 Page 38 / 60 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.
PAGE 39
Report No.: C140428Z01-RP1 6.8 SPURIOUS EMISSIONS 6.8.1. CONDUCTED MEASUREMENT LIMIT In any 100 kHz bandwidth outside the frequency band in which the spread spectrum or digitally modulated intentional radiator is operating, the radio frequency power that is produced by the intentional radiator shall be at least 20 dB below that in the 100 kHz bandwidth within the band that contains the highest level of the desired power, based on either an RF conducted or a radiated measurement.
PAGE 40
Report No.: C140428Z01-RP1 Test Plot ( GFSK ) CH Low (30MHz ~26.5GHz ) CH Low (2.31GHz ~2.41GHz ) FCC ID: 2AAHXMXH-BT800 Page 40/60 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.
PAGE 41
Report No.: C140428Z01-RP1 CH Mid (30MHz ~ 26.5GHz) CH High (30MHz ~ 26.5GHz) FCC ID: 2AAHXMXH-BT800 Page 41 / 60 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.
PAGE 42
Report No.: C140428Z01-RP1 CH High (2.475GHz ~ 2.5GHz) FCC ID: 2AAHXMXH-BT800 Page 42 / 60 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.
PAGE 43
Report No.: C140428Z01-RP1 Test Plot (8DPSK ) CH Low (30MHz ~26.5GHz ) CH Low (2.31GHz ~2.41GHz ) FCC ID: 2AAHXMXH-BT800 Page 43 / 60 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.
PAGE 44
Report No.: C140428Z01-RP1 CH Mid (30MHz ~ 26.5GHz) CH High (30MHz ~ 26.5GHz) FCC ID: 2AAHXMXH-BT800 Page 44/60 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.
PAGE 45
Report No.: C140428Z01-RP1 CH High (2.475GHz ~ 2.5GHz) FCC ID: 2AAHXMXH-BT800 Page 45 / 60 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.
PAGE 46
Report No.: C140428Z01-RP1 6.8.2. RADIATED EMISSIONS LIMIT 1. Except as provided elsewhere in this Subpart, the emissions from an intentional radiator shall not exceed the field strength levels specified in the following table: Frequency (MHz) Field Strength (mV/m) 0.009-0.490 2400/F(kHz) Measurement Distance (m) 300 0.490-1.705 24000/F(kHz) 30 1.705-30.
PAGE 47
Report No.
PAGE 48
Report No.: C140428Z01-RP1 TEST CONFIGURATION Below 30MHz Antenna tower 3m Loop antenna EUT 4m Spectrum / Receiver Turntable 1m 0.8m Pre-amp Reference ground plane Below 1 GHz Antenna tower Bi-log antenna 3m EUT 4m Spectrum analyzer Turntable 0.8m 1m Reference ground plane FCC ID: 2AAHXMXH-BT800 Page 48/60 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.
PAGE 49
Report No.: C140428Z01-RP1 Above 1 GHz Antenna tower Horn antenna 3m EUT 4m Spectrum analyzer Turntable 0.8m FCC ID: 2AAHXMXH-BT800 1m 30cm Pre-amp Page 49/60 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.
PAGE 50
Report No.: C140428Z01-RP1 TEST PROCEDURE 1. The EUT is placed on a turntable, which is 0.8m above ground plane. 2. The turntable shall be rotated for 360 degrees to determine the position of maximum emission level. 3. EUT is set 3m away from the receiving antenna, which is varied from 1m to 4m to find out the highest emissions. 4. Maximum procedure was performed on the six highest emissions to ensure EUT compliance. 5.
PAGE 51
Report No.: C140428Z01-RP1 TEST RESULTS Below 1 GHz Operation Mode: TX Test Date: May 5, 2014 Temperature: 24oC Tested by: Eve Wang Humidity: 52% RH Polarity: Ver. / Hor. Correction Result Limit Factor (dBμV/m) (dBμV/m) (dB/m) -21.48 29.72 43.50 Remark -13.78 Antenna Pole (V/H) V 43.50 -12.67 V QP 33.16 46.00 -12.84 V QP -16.10 35.22 46.00 -10.78 V QP 40.84 -12.86 27.98 46.00 -18.02 V QP 700.2700 44.40 -11.94 32.46 46.00 -13.54 V QP 30.9700 42.46 -12.22 30.
PAGE 52
Report No.: C140428Z01-RP1 Above 1 GHz GFSK Operation Mode: Temperature: Humidity: Test Date: Tested by: Polarity: TX(CH Low) 24oC 52% RH Correction Result Limit Factor (dBμV/m) (dBμV/m) (dB/m) April 29,2014 Eve Wang Ver. / Hor. Frequency (MHz) Reading (dBμV) 3727.0000 41.34 -0.80 40.54 74.00 -33.46 Antenna Pole (V/H) V 4807.0000 45.53 2.75 48.28 74.00 -25.72 V peak 5995.0000 39.60 7.56 47.16 74.00 -26.84 V peak 6328.0000 39.96 7.44 47.40 74.00 -26.60 V peak 7795.
PAGE 53
Report No.: C140428Z01-RP1 Operation Mode: TX(CH Mid) Test Date: April 29,2014 Temperature: 24oC Tested by: Eve Wang Humidity: 52% RH Polarity: Ver. / Hor. Correction Result Limit Factor (dBμV/m) (dBμV/m) (dB/m) Margin (dB) Antenna Pole (V/H) Remark 74.00 -35.77 V peak 40.97 74.00 -33.03 V peak 3.18 48.62 74.00 -25.38 V peak 40.32 7.57 47.89 74.00 -26.11 V peak 6580.0000 40.72 7.32 48.04 74.00 -25.96 V peak 9028.0000 39.87 8.51 48.38 74.00 -25.
PAGE 54
Report No.: C140428Z01-RP1 Operation Mode: TX(CH High) Test Date: April 29,2014 Temperature: 24 oC Tested by: Eve Wang Humidity: 52% RH Polarity: Ver. / Hor. Correction Result Limit Factor (dBμV/m) (dBμV/m) (dB/m) Margin (dB) Antenna Pole (V/H) Remark 74.00 -35.95 V peak 38.04 74.00 -35.96 V peak -0.81 40.84 74.00 -33.16 V peak 42.20 3.68 45.88 74.00 -28.12 V peak 7435.0000 40.93 7.41 48.34 74.00 -25.66 V peak 8902.0000 41.09 8.50 49.59 74.00 -24.
PAGE 55
Report No.: C140428Z01-RP1 8DPSK Operation Mode: TX(CH Low) Test Date: April 29,2014 Temperature: 24oC Tested by: Eve Wang Humidity: 52% RH Polarity: Ver. / Hor. Correction Result Limit Factor (dBμV/m) (dBμV/m) (dB/m) Margin (dB) Antenna Pole (V/H) Remark 74.00 -34.97 V peak 37.73 74.00 -36.27 V peak 2.75 45.88 74.00 -28.12 V peak 39.55 7.57 47.12 74.00 -26.88 V peak 7633.0000 40.49 7.54 48.03 74.00 -25.97 V peak 8236.0000 39.84 7.96 47.80 74.00 -26.
PAGE 56
Report No.: C140428Z01-RP1 Operation Mode: TX(CH Mid) Test Date: April 29,2014 Temperature: 24oC Tested by: Eve Wang Humidity: 52% RH Polarity: Correction Result Limit Factor (dBμV/m) (dBμV/m) (dB/m) Ver. / Hor. Margin (dB) Antenna Pole (V/H) Remark 74.00 -33.48 V peak 40.95 74.00 -33.05 V peak 3.18 46.47 74.00 -27.53 V peak 39.60 7.57 47.17 74.00 -26.83 V peak 7912.0000 40.20 7.71 47.91 74.00 -26.09 V peak 8686.0000 40.40 8.33 48.73 74.00 -25.
PAGE 57
Report No.: C140428Z01-RP1 Operation Mode: TX(CH High) o Test Date: April 29,2014 Temperature: 24 C Tested by: Eve Wang Humidity: 52% RH Polarity: Ver. / Hor. Correction Result Limit Factor (dBμV/m) (dBμV/m) (dB/m) Margin (dB) Antenna Pole (V/H) Remark 74.00 -34.66 V peak 40.92 74.00 -33.08 V peak 3.68 44.09 74.00 -29.91 V peak 40.44 7.38 47.82 74.00 -26.18 V peak 6913.0000 40.37 7.17 47.54 74.00 -26.46 V peak 8506.0000 39.77 8.18 47.95 74.00 -26.
PAGE 58
Report No.: C140428Z01-RP1 6.9 POWERLINE CONDUCTED EMISSIONS LIMIT For an intentional radiator which is designed to be connected to the public utility (AC) power line, the radio frequency voltage that is conducted back onto the AC power line on any frequency or frequencies within the band 150 kHz to 30 MHz shall not exceed 250 microvolts (The limit decreases linearly with the logarithm of the frequency in the range 0.15 MHz to 0.50 MHz).
PAGE 59
Report No.: C140428Z01-RP1 TEST CONFIGURATION Vert. reference plane EMI receiver 40cm EUT 80cm LISN Reference ground plane See test photographs attached in Appendix 1 for the actual connections between EUT and support equipment. TEST PROCEDURE 1. The EUT was placed on a table, which is 0.8m above ground plane. 2. Maximum procedure was performed on the six highest emissions to ensure EUT compliance. 3. Repeat above procedures until all frequency measured were complete.
PAGE 60
Report No.: C140428Z01-RP1 Test Data Operation Mode: Charge + Line in Test Date: May 4, 2014 Temperature: 26oC Humidity: 60% RH Tested by: Eve Wang Frequency (MHz) QuasiPeak Average Correction QuasiPeak Average QuasiPeak Average QuasiPeak Average Line Reading Reading Factor Result Result Limit Limit Margin Margin (dBuV) (dBuV) (dB) (dBuV) (dBuV) (dBuV) (dBuV) (dB) (dB) 0.2620 28.06 17.10 9.69 37.75 26.79 61.36 51.37 -23.61 -24.58 L1 0.5260 27.28 14.35 9.69 36.