A9 EN FR A9 Robot Vacuum Cleaner Aspirateur robot A9
Table of Contents EN Important Safety Instructions ................................................................................ 4 Explanation of Symbols ......................................................................................... 5 Intended Use ........................................................................................................... 5 Tips ..........................................................................................................................
EN IMPORTANT SAFETY INSTRUCTIONS When using electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE • WARNING - a) Do not leave appliance when plugged in. Unplug from outlet when not in use and before servicing. b) Do not use outdoors or on wet surfaces. c) Do not allow to be used as a toy. Close attention is necessary when used by or near children. d) Use only as described in this manual.
Explanation of Symbols EN This product is for indoor use only. Alternating current (AC). Direct current (DC). VI BC Regulations). Intended Use • This product is intended for household use only. It is not intended for commercial use. • This product is intended to be used in dry indoor areas only. Tips • Stop the robot promptly if error occurs during cleaning. Before using the • Roll up carpet tassels and make sure curtains and table cloths are not in • • detect the height difference.
EN List of Accessories Robot x 1 Charging dock x 1 Remote control x 1 Adapter x 1 Instruction manual x 1 L R Left side brush x 2 Electrowall x 1 Right side brush x 2 AAA battery x 2 High performance Rubber brush x 1 AA battery x 2 Cleaning comb x1 Quick start guide x 1 Product Description Robot Bumper Camera Start/Pause button with indicator WiFi indicator Dustbin release button Dustbin Power socket 6 ON/OFF switch Cliff sensor
Dustbin EN Dustbin release button Dustbin cover Isolation bracket Dustbin ElectroWall Power switch Power indicator Signal transmitter Battery compartment 7
EN Charging Dock Power socket Adapter Power supply indicator light Charging pads Remote Control Display Schedule time indicator Local time indicator Direction button Start/pause button Clock Schedule Spot mode MAX mode HOME Edge mode (Auto charge) NOTICE - The direction buttons cannot be used during a cleaning cycle.
Before First Use EN DANGER - Keep any packaging materials away from children – these materials are a potential source of danger, e.g. suffocation. • Check the robot and accessories for transport damages. • Before connecting the robot to the power supply, check that the power supply voltage and current rating corresponds with the power supply details shown on the adapter’s rating label. • Install the AAA batteries in the remote control. • Install the AA batteries in the electrowall.
EN Operation Charging Automatic Charging In the AUTO mode, the robot comes back to the charging dock automatically when the battery runs low. • Place the charging dock against the wall. Ensure there are no obstacles or • Connect the adapter’s plug to the charging dock’s socket. Connect the adapter’s power plug to the power supply. The power supply indicator lights up green. m) (1 3.2 m) 3.2 (1 ) (2m 6.
EN • Set the robot’s ON/OFF switch to I green. After 25 seconds of start-up, the start/pause button fades in and out. • Press the HOME button on the remote control to allow the robot to dock itself and start automatic charging. Manual Charging • Connect the adapter’s plug to the robot’s power socket. • Connect the adapter’s power plug to the power supply. The start/pause 1 2 • After 25 seconds of start-up, charging starts.
EN Basic Operation Modes To enter the operation modes, set the ON/OFF switch to I position. Select Mode Select mode allows you to choose the operating mode of the robot. • To enter the select mode, press the start/pause button. The start/pause button’s indicator fades in and out. Auto Cleaning Mode • To start the auto cleaning mode, press the start/pause button. The start/pause button’s indicator lights up and the robot starts operation.
Cleaning Modes EN NOTICE - the “Basic Operation Modes” chapter). Auto Cleaning Mode The default cleaning mode. The robot plans a path and cleans along a zigzag pattern. During cleaning, the robot detects and cleans areas that have been missed. • To start the auto cleaning mode, press the start/pause button. Spot Mode with concentrated dust and debris. • To start the spot mode, press the spot mode button.
EN Edge Mode Use for dirty areas around the walls. The robot moves forward until it detects the wall. It goes around the edges of the walls once, then stops the operation. • To start the edge mode, press the edge mode button. MAX Mode Use for heavily soiled areas. The robot cleans the whole area with increased suction power. • To start the MAX mode, press the MAX mode button.
Setting a Cleaning Schedule EN The robot features a schedule mode. It allows to pre-set an automatic cleaning session. NOTICE - Before setting the schedule/local time, ensure the product is in the select mode (see the “Basic Operation Modes” chapter). Aim the remote control at the product while setting the schedule/local time. NOTICE - When choosing the settings, ensure the robot beeps when pressing the Setting the Local Time • Press the clock button.
EN Canceling the Scheduled Time NOTICE - To cancel the scheduled time, you can also switch off the robot. • • Press the up or down buttons to set the schedule time to “00:00”. Press the schedule button. ElectroWall The electrowall creates an invisible barrier that the robot cannot cross. Use the electrowall to stop the robot from entering the restricted area. • Switch the power switch of the electrowall to the ON position. The power indicator lights up green.
APP Download and Connection EN Downloading the App The robot can be controlled by the “ILIFE Robot” app. Scan the QR code to install the app on your iOS or Android device. Starting the App 1 2 3 Set a password My robot New password (min.
4 5 EN Add a robot 6 ? Select Wi-Fi A series robot vacuum Connecting to home WiFi Choose a WiFi network Off Enter WiFi passwork To see available networks, turn Wi-Fi on. To improve location accuracy, system apps and services can still scan for Wi-Fi networks. you can change this in scanning settings. A9 Note: Robot can’t connect to 5G WiFi Wi-Fi preferences Next • Choose your robot. 7 • Switch on the WiFi. NOTICE - The robot is not 5G Wi-Fi compatible. • Choose the WiFi network.
10 11 EN Robot-B4A6 Cancel Signal strength Excellent Encryption type Searching a network... WPA2 PSK 123456789 45% Show advanced options Don’t move App to background CANCEL CONNECT • Select "Robot-XXXX" connection. Enter default password: 123456789 • Return to APP. • Tap on "Start connecting". 12 • Wait until the connection is completed. 13 Connected Connected My robot ILIFE robot vacuum Status: Online Name your robot ILIFE robot vacuum Completed • Set your robot’s name.
EN Cleaning and Maintenance WARNING - To prevent electric shock, unplug the robot/charging dock before cleaning. WARNING - Never hold the robot under running water.
Cleaning the Robot EN • To clean, wipe with a soft, slightly moist cloth. • Never use corrosive detergents, wire brushes, abrasive scourers, metal or sharp utensils to clean the product. Cleaning/Replacing the Side Brushes • Use two hands to pull off each side brush. • Pull or cut away hair from the side brushes and the pins. 5 6 • Clean the side brushes with a soft cloth.
EN Cleaning/Replacing the Main Brush • Press the brush compartment cover notches. Lift the cover (Fig. 1). • Take out the brush from the brush compartment (Fig. 2). • Remove the dirt and hair using the cleaning comb (Fig. 3). 1 2 3 2 1 • Place the main brush back in the brush compartment (Fig. 4). • Close the brush compartment cover (Fig. 5).
Cleaning the Dustbin EN • Press the dustbin release button. Remove the dustbin from the robot (Fig. 1). • Pull up the dustbin cover to open the dustbin (Fig. 2). • Empty the dust and debris into trash. Be careful not to empty any dustbin parts (Fig. 3). 1 3 2 • Remove the isolation bracket (Fig. 4). • Clean the isolation bracket and the dustbin with the cleaning comb (Fig. 5). • Rinse the isolation bracket with water and let dry. 4 5 • Reinsert the isolation bracket. • Close the dustbin.
EN Cleaning the High Performance Filter • cover (Fig. 1). • • 1 2 • 1 2 compartment. Troubleshooting NOTICE - Never hold the robot under running water. Problems Solutions The robot cannot operate normally. • Make sure the main power switch is in the ON position. • Make sure the battery is fully charged. • If the problem persist, turn off the power switch and then turn it back on. The robot stopped cleaning suddenly. • Check if the battery has enough electricity.
Solutions The robot repeatedly rotates. • After loading,the robot will rotate to obtain and plan the best cleaning route sometimes,which is a normal cleaning status. • Check if the side wheels and nose wheel are working properly.Clean the entangled dirt and hair regularly by cleaning comb. The noisy is seriously when the robot is cleaning. • When Max mode is activated, the sound will increase accordingly. • Check if any obstacle are blocking the suction inlet.
EN Problems Solutions The robot cannot return to the Charging Dock. • Ensure that the robot is not stopped midway, otherwise it will return to the last starting point and stop after the cleaning is finished. • When the robot is near the Charging Dock, it will return more quickly. However, if the Charging Dock is located far away, robot will need more time to return. Please be patient as it works its way back. The robot found the charging dock, but could not recharge normally.
Solutions The voice of the robot is invalid or the voice is fragmentary. • Check if the voice switch is turn off in the app. • If the voice is invalid after turn on voice switch in the app,contact the ILIFE service center to repair. The remote control does not work. • Replace the batteries (2 AAA) in the remote control. • Make sure the robot is turned on and fully charged. • Ensure the robot is in the select mode before setting the schedule/local time.
EN Problems Solutions You cannot control The robot with Amazon Alexa. • The “ILIFE Robot” Skill for Alexa is currently only available in English. Voice Announcement Solution Left brush stuck, please remove and Remove and clean the left side brush . clean. Clean the left side pin. Right brush stuck, please remove and clean. Left wheel stuck, please rotate and clean. Remove and clean the right side brush . Clean the right side pin. Scroll and clean the left side wheel .
FCC - Supplier’s Declaration of Conformity EN 2AO2M-A581 Responsible Party Shen Zhen ZhiYi Technology Co., U.S. Contact Information Email: support@iliferobot.com Telephone Number 1-800-631-9676 (Toll free for USA & Canada) Monday-Friday from 9:00 AM - 5:00 PM CST FCC Compliance Statement 1. 2. the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
EN Canada IC Notice • This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence- • (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. set forth for an uncontrolled environment. • This Class B digital apparatus complies with Canadian CAN ICES-3(B) / NMB-3(B) standard. Power input: Power output: , 0.
ILIFE Customer Service Customer Service Number: 1-800-631-9676 (Toll free for USA & Canada) +86-75521005927 (Outside USA & Canada) Monday-Friday from 9:00 AM - 5:00 PM CST Email: support@iliferobot.