User Guide

1. Fail to connect to WIFI?
Download the latest version of application from Apple store or Android and sign
up. Select the right robot model according to the APP guidelines. Enter the right
WIFI password on the APP (do not use 5G or public network). Check if the router
has firewall to protect and block the robot from connecting to WIFI. Make sure
the WIFI signal is strong in order to connect successfully.
2. Fail to return to the charging base.
It is suggest to start the robot from the charging station and not pick up the robot
during its cleaning cycle. In order to remain sufficient signal, please remove the
objects within 3 ft/1 m to the left and right side and within 6 ft/2 m of the front
of the Charging Base. When ILIFE A9 is in the vicinity of the Charging Base, it will
return more quickly. However, if the Charging Base is located far away, ILIFE A9
will need more time to return. Please be patient as it works its way back. Clean
the charging contact pins.
3. How should i open the dustbin?
Keep one hand on the upper end of the dust box, and put another hand on the
lower end of the dust box. Use your finger force to open the dust box.
4. Working time is short?
Please fully charge the machine before each cleaning cycle, Charge the robot on
charging station for 4-5 hours and then restart and observation. (The AUTO
button flashes on the robot when charging, and the green light is on steady after
being fully charged). It is recommended to sort the scattered objects on the
ground. If the obstacles are more complicated, the excessive collision may cause
the machine to think that it has completed the cleaning task. Verify if the machine
has a red light alarm during the work. If yes, please fix the fault according to the
voice alarm.