User Manual

ACCESSING INTERNET
Make Wi-Fi connection
The device connects to the internet using a wireless broadband connections. You can connect using
a home network, or when you’re out and about using the many free hotspots that you can find in
coffee shops, libraries etc.
To connect to Wi-Fi please follow these simple instructions:
(1) Tap the Setting icon
(2) Slide the Wi-Fi button to the right so it’s in the “ON” position
(3) The device will scan the area and display a list of all available Wi-Fi hotspots. Choose a network
from the list, then tap “connect” to connect. If the hotspot is “password protected” you need to get
the password from your Internet Service Provider, or from your network administrator
Note:
1. The available network list is constantly refreshed automatically
2. When the Wi-Fi is enabled, the device will connect automatically to your configured networks
when they are in range.
3. If the unit reports “ no connection” or “ connection failed”…the most common cause of this is that
the Password was typed incorrectly. To try again, select your WIFI name, press Forget；turn the
WIFI off and on, to start the procedure again.
4. Once you have connection the first time, you not need to go through this procedure again as all
settings and connections are now written to the unit’s software.
WEB BROWSER
On the application page, press the icon
to connect to the Internet through the browser, input the
URL in the address bar .After opening the webpage , you can use finger to slip up and down, to scan
and check other part of website.