User's Manual

8
Changing the Wallpaper
Tap the setting icon on the Home screen to open the setting menu and set your desired
wallpaper in the display submenu.
Display all the applications and widgets
The device has many useful pre-installed application / widgets, You can tap the Application
Tab to display them.
ACCESSING INTERNET
Make Wi-Fi connection
The device connects to the internet using a wireless broadband connections. You can connect
using a home network, or when you’re out and about using the many free hotspots that you
can find in coffee shops, libraries etc.
To connect to Wi-Fi please follow these simple instructions:
(1) Tap the Setting icon
(2) Slide the Wi-Fi button to the right so it’s in the “ON” position
(3) The device will scan the area and display a list of all available Wi-Fi hotspots. Choose a
network from the list, then tap “connect” to connect. If the hotspot is “password protected”
you need to get the password from your Internet Service Provider, or from your network
administrator
Note:
1. The available network list is constantly refreshed automatically
2. When the Wi-Fi is enabled, the device will connect automatically to your configured
networks when they are in range.
3. If the unit reports “ no connection” or “ connection failed”…the most common cause of this
is that the Password was typed incorrectly. To try again, select your WIFI name, press
Forget；turn the WIFI off and on, to start the procedure again.
4. Once you have connection the first time, you not need to go through this procedure again
as all settings and connections are now written to the unit’s software.