User's Manual

TM70Pi V3.2 (11/03) 120021.pdf. 71
IKUSI reserves the right to change this information without prior notice.
CAN ADRESS
+VI
GND
CANL
CANH
BUS TERMINATI
ON
RL4
Pin
Name
Function
+ +VI DC power supply between 8 and 30V.
- GND Ground
RL3
Pin
Name
Function
1 GNDCAN CAN Ground
2 CANL CANL bus signal (CAN low signal)
3 SHLCAN Shielding
4 CANH CANH bus signal (CAN High signal)
5 VCAN Power supply
The positioning of the 5 analogue/digital input micro-modules will be consecutively from left to right as shown in
the picture below: