User's Manual

TM70Pi V3.2 (11/03) 120021.pdf. 19
IKUSI reserves the right to change this information without prior notice.
The LED signalling is the one recommended by the CiA (CAN in Automation) Organisation in its document
DR-303-1:
Bus Termination
Next to the connector, there is one jumper that allows to connect/disconnect the bus termination. It is
important for a correct bus operation that bus terminations are connected in both ends, and disconnected in
the intermediate nodes.
8.3 - TRANSMITTER DATA DICTIONARY
The dictionary objects supported by the TM70 are:
1000: DEVICE TYPE
1001: ERROR REGISTER
1002: STATUS REGISTER
1003: PREDEFINED ERROR FIELD
1003.0: number of errors
1003.x: standard error field
1005: COB-ID SYNC
1006: COMMUNICATION CYCLE PERIOD
1007: SYNCHRONOUS WINDOW LENGTH
1008: MANUFACTURER DEVICE NAME
1009: MANUFACTURER HARDWARE VERSION
100A: MANUFACTURER SOFTWARE VERSION
100C: GUARD TIME
100D: LIFE TIME FACTOR
1014: COB-ID EMCY
1015: INHIBIT TIME EMERGENCY
1017: PRODUCER HEARTBEAT TIME
1018: IDENTITY OBJECT