User's Manual

TM70Pi V3.2 (11/03) 120021.pdf. 102
IKUSI reserves the right to change this information without prior notice
23.1- FUNCTIONAL CHARACTERISTICS
i-KONTROL / console box transmitters for hoisting machinery applications, mobile applications with On/Off
and/or proportional control
Main characteristics:
Available bands: 433/870/915/419/865/918MHz
NiMH rechargeable batteries
Fast (< 2 hours) and intelligent CB70 battery charger
New LE70IK emitter logic board
Fully compatible with TM70 remote control range products
Main mechanisms:
- Two axes multi step or stepless MO70 joysticks compatible / Single axis resistive analogue
manipulator / Two axis resistive analogue manipulator
Auxiliary mechanisms:
- 1-0-1 position selector switches with maintained position or forced return to 0 position
- 0-1 position selector switches with maintained position or forced return to 0 position
- 6, 16 and 24 positions binary and rotary switches
- Potentiometers
Easy and fast working frequency channel change by software and/or automatic working channel selection
CAN bus physical layer compatible receiver with CANopen communication protocol; other available
communication protocols, IQAN, SAE J1939, Profibus DP and RS-232 / RS-485 (optional)
TFT colour display option for feedback information. Warning and alarm signals management with feedback
option, using the graphic display and/or the bicoloured leds. Feedback of digital and/or analogue signals to
the machine/user’s interface.
LA70 range limiter (optional). Specified working area limit range under defined working conditions.
NOTA IMPORTANTE:
Systems with wired cable connection option available, it is highly recommended to disconnect
and to remove this cable of the system if the system is not working with this option or it is not
necessary.