Installation Guide & User Manual Version: IKE/ BOZO SERIES Builedansersad Bessie Mount Range End 8" Diameter Round Top Vent Only itch STOP and read! Test before installing 1. Please unpack the tangs hood and accessories carefully 2. Remove the baffle filters, check any dent ar damage inside and outside. 3. if found any loosing parts; pleads remove them. 4, Place the range hood on a flat stable surface, plug. in 120V AC power source, Press the power button and the speed buttons to turn on, §.
[KNOT Series Model Mos IKBOT(367 5 IKBOA(367 BOXLIKE Series Model Nox, BOZO. 80°} 1KB02{36" 1KBOZ= 2") IMPORTANT READ THIS FIRST READ BEFORE INSTALLATION 1. Carefully chick all contents of packages: 2: Thoroughly inspect the unit for any shipping: damages, cosmetic danishes or defects. 3. Havel riffled contractor! electrician test the unit before installation. IF THERE I$ ANY PROBLEM: 1. DO NOT INSTALL THE UNIT AND KEEP-ALL ORIGINAL PACKAGING MATERIAL. 2. Have your.
Final Assembly ‘Install the Gil tune! info recess SUPP Agar rear of Np dd, and assemble the handle to stainless steel baffle fillers Refer ta Figueroa 7. 2:install balls fillers. Angle baffle filler toward back ol hued 1. Ash bale filter up isl almostievel 2. Slide forward info recess behind the front officious 3. Lower Bate Miter 4. Slide Back unities fits into resting position 5. Refer to Firelight 7.
