User Manual

Step 2: Enter Remote Code
● Press Lock (red square) to increment the “100”s place
● Press Unlock (blue square) to increment the “10”s place
● Press Trunk (green square) to increment the “1”s place
● When you have entered the desired number, go to Step 3
● Example 1: To enter the remote code “326” press Lock 3 times to
increment the “100”s place twice (100 * 3 = 300), press Unlock
two times to increment the “10”s place (10 * 2 = 20), and press
Trunk six times to increment the “1”s place.
● NOTE: Zero is not a valid programming digit code, if you do
increment the “1”s or “10”s or “100”s place place before exiting
programming mode, it will trigger an error and the LED will flash 3
times then turn OFF, go to Step 1
● NOTE: Pressing any button more than 7 times will trigger an error
and the LED will flash 3 times then turn OFF, go to Step 1
● NOTE: If too much time passes between button presses the
remote will timeout and flash the LED 3 times then turn OFF, go
to Step 1
3