User Manual

Programming Summary
1. Press Function I + Alarm at the same time, LED will turn on
2. Enter the number that corresponds to the key you want to program:
a. Use Lock to increment the “100”s place
b. Use Unlock to increment the “10”s place
c. Use Trunk to increment the “1”s place
3. Exit programming mode by pressing the Function I + Alarm buttons at the same time
4. The code you programmed will be flashed on the LED, first with a sequence of pulses indicating the
value of the “100”s place followed by pause, then a sequence of pulses indicating the value of the “10”
s place followed by a pause, and finally a sequence of pulses indicating the “1”s place.
2