User Manual

Changing the CR1632 Battery
1. You Will Need:
a. A Small Flat head Screwdriver
b. A small piece of wood or plastic such as a pen-cap.
2. Insert the screwdriver into the notch on the left side of the remote. Gently twist till the top and bottom shell of the remote
pop apart slightly. If the shell does not pop apart, you may need a larger screwdriver.
3. Separate the back and front shell. Remove the rubber insert and the remote circuit board. Do not set the circuit board down
on any metal surface!
4. Using the wood or plastic tool, carefully push the battery out the bottom of the holder. Insert a new CR1632 battery with
any text facing up. Safely dispose of the old battery.
5. Reassemble the remote and use as normal.
7