User Manual
Spike User Manual 8
5 Turn your smartphone horizontally
and aim at the same two objects.
Repeat steps 3 and 4 to align the
laser horizontally.
Additional Information
Calibrating Your Compass
Calibrating your compass is only required if you intend to capture the location of your
target (latitude, longitude, altitude), and export KMZ les. You need to ensure that
your smartphone or tablet’s compass is calibrated so your target’s location can be
accurately captured.
TIP: Calibration instructions and video tutorials can be found in the Spike Support
Center. Visit www.ikegps.com/support
Charging Your Spike
Your Spike has an internal battery that requires charging. After setting up your Spike,
we recommend charging your Spike for approximately 3 hours.
1 Connect the USB cable provided to the micro USB charging port on the bottom
of your Spike.
2 Connect the other end of the USB cable to any device that can charge USB
devices (e.g. computer, wall charger, etc). The LED indicator will ash while
charging.
3 The LED indicator will turn green when Spike is fully charged. Disconnect the
USB cable and store in a safe place.
Turning Your Spike Off
Your Spike will automatically turn off after 1 minute of inactivity. Alternatively, you can
turn it off manually by holding down the Power button for 5 seconds until the blue
LED indicator turns off.
EDGE OF DOOR
9'1"
X:
0
Y:
-15
Settings Laser Calibration