User Manual
Spike User Manual 16
5
Taking a Point-to-Point Measurement
To take an accurate Point-to-Point Measurement with your Spike, ensure
that:
1) Your feet are planted in a single location where you can view both
targets.
2) You keep the two targets within a 90-degree arc for best accuracy.
3) Your targets are at least 20ft/6m away and within 325ft/100m.
4) You maintain a consistent arms length and hold Spike at approximately 1
foot from your head.
5) You aim Spike at your rst target and hold it steady. Spike will be ready
to capture the rst point when the border of the screen changes from red
to green and the “Hold Steady” message goes away.
6) You smoothly and quickly rotate from Point A to Point B, without moving
your feet.