User Manual
Black
Europe - EU Declaration of Conformity
This device complies with the essential requirements and other relevant provisions of
the R&TIE Directive 1999/5/EC. The following test methods have been applied in order
to prove presumption of conformity with the essential requirements of the R&TIE
Directive 1999/5/EC:
· EN 300 328 V1.8.1:2011
Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband
Transmission systems; Data transmission equipment operating in the 2,4 GHz ISM
band and using spread spectrum modulation techniques; Harmonized EN covering
essential requirements under article 3.2 of the R&TIE Directive
· EN 301 489-1 V1.9.2
Electromagnetic compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic
Compatibility (EMC) standard for radio equipment and services; Part 1: Common
technical requirements
· EN 301 489-17 V2.2.1
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic
Compatibility (EMC) standard for rad io equipment and services; Part 17: Specific
conditions for 2,4 GHz wideband transmission systems and 5 GHz high performance
RLAN equipment
Disposal of Old Electrical & Electronic Equipment
(Applicable in the European Union)
This symbol on the product or on its packaging indicates that this product
shall not be treated as household waste. Instead it shall be returned, at no cost to
you, to ikeGPS. By ensuring this product is disposed of correctly, you will help prevent
potential negative consequences for the environment and human health, which could
otherwise be caused by inappropriate waste handling of this product. The recycling of
materials will help to conserve natural resources. For more detail on how to recycle
your Spike please visit www.ikegps.com/support and submit a request for collection.
ikeGPS will coordinate the collection of the unit from you with our logistics service
provider at no additional cost to you.
INSIDE
Warning: the following
label samples are
placed on your laser
tool to inform of the
laser class for your
convenience and safety.
Please reference the
Product Manual for the
specifics on a particular
product model.
Industry Canada
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject
to the following two conditions:
· This device may not cause interference; and
· This device must accept any interference, including interference that may cause
undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils
radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes:
· l’appareil ne doit pas produire de brouillage;
· l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si
le brouillage est susceptible d’en compromettre le fonctionnement.
This equipment complies with FCC/IC radiation exposure limits set forth for an
uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines
in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules.
This equipment has very low levels of RF energy that are deemed to comply without
testing of specific absorption ratio (SAR).
Spike
Complies with 21 CFR
1040.10 and 1040.11
except for deviations
pursuant to Laser Notice
No.50, dated June 24, 2007.
IKE-SP02
5VDC 350mA
MADE IN CHINA
FCC ID: 2ACBG3000
IC: 11952A-3000
TYPE1
ikeGPS
42 Adelaide Rd
Wellington
New Zealand
160-0 2310
60950-1
E477159
www.ikegps.com
E2087
FOLD
FOLD