We’re IKE, TM The PoleOS Company IKE / IKE+ Device Quick Start Guide
IKE / IKE+ Device Quick Start Guide What’s in the box 1 IKE Device 2 Hard case 3 Tripod set with carrying bag 2 3 4 Accessories: soft case, guy gauge, offset stick, AC wall charger, car charger.
IKE / IKE+ Device Quick Start Guide Charging the IKE • Remove the port cover A on the right side of the IKE Device and connect the IKE Charging Cable to the charging port B . • Connect the USB end of the IKE Charging Cable to the Wall Charging Adapter C . • Plug the IKE Wall Charging Adapter into an electrical outlet D . light is flashing flashing IfIf light contactikeGPS ikeGPSsupport contact support E A B B • Charge your IKE Device for 8 hours.
IKE / IKE+ Device Quick Start Guide Powering on and off • To power on, press and hold the power button until the display illuminates. • To power off, press and hold the power button until you see an on-screen menu appear. Then tap “Power off” at the top of the list from the four options ‘Power off’, ‘Restart’, ‘Screenshot’, and ‘Emergency’.
IKE / IKE+ Device Quick Start Guide Connecting to WiFi 1 With the IKE Device turned on, swipe down from the top of the screen. 2 Press and hold your finger on the WiFi A icon at the top left corner of the screen. Hold until the WiFi setting screen opens (~2 seconds). 3 Ensure WiFi is toggled ON. 4 Select the WiFi Network you would like to connect to. 5 In the dialogue box that opens, enter the WiFi password and select “Connect”. 6 Allow the connection to establish.
IKE / IKE+ Device Quick Start Guide Getting started in IKE Field 1 Locate the IKE Field App icon to open. 2 Input the credentials you made in IKE Office (desktop software). A and tap the 3 After logging in, tap the menu icon in the top left corner of the screen. You will see an IKE Office department name at the top of the menu. If you want to change the department you are collecting data in, tap the department name and choose the correct department from the list.
IKE / IKE+ Device Quick Start Guide RTK Setup for IKE+ Devices only • Connect to your RTK Provider • Fill out the server information • Menu A with IKE and GPS serial/model numbers GPS Config A GPS Config B GPS Connected GPS Connected C Fix type RTK fixed Fix type RTK fixed H accuracy 2.746 cm Internet Connected H accuracy 2.
IKE / IKE+ Device Quick Start Guide Getting started in IKE Field IKE 4, back 1 Attach the tripod adaptor plate the base of the IKE Device. 2 Ensure that the tripod adaptor plate is positioned correctly as shown with the alignment pin B in the lowest recess. Tighten the D-ring screw C until it is secure. A to A Alignment Pin B A C 2 3 Hold the quick-release lever D outwards and clip the tripod adapter plate on the back of the IKE Device to the tripod base plate as shown.
IKE / IKE+ Device Quick Start Guide Your IKE Device is now set up and ready to collect pole data! Have questions about your IKE training or getting started? IKE Customer Support IKE / IKE+ © Device Quick Start Copyright 2021 ikeGPS Ltd. Guide All Rights Reserved. (v1.
