G G G INSTRUCTIONS MANUAL 21.5 INCH LED CCTV MONITOR Model ULE-217A Please read this manual thoroughly before use, and keep it handy for future reference.
G G G G G G G G
G G G SAFETY INSTRUCTION CAUTIONS ………………………………………………………….……G 2~3 ……………………………………………………………..........................G 4 FCC RF INTERFERENCE STATEMENT INSTALLATION …………………………….......................G 5 ………………………………………………………………………….. 6 CONNECTING WITH EXTERNAL EQUIPMENT REMOTE FUNCTIONS ……………………………………G 7 ………………………………………………………………… 8 CONTROLS AND FUNCTIONS ……………………………………………………….. 9 ~ 16 MOUNTING GUIDE ……………………………………………………………………..
G G G Important Safety Instruction G 1. Read these instructions. 2. Keep these Instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers,stoves, or other apparatus (including amplifiers) that produce heat. 9.
G G G G G - The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed no the apparatus. 14 Minimum distances(e.g. 10cm) around the apparatus for sufficient ventilation. “WARNING – To reduce the risk of fire or electric shock, do not expose the apparatus to rain or moisture.” “The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
G G G CAUTION The power supply cord is used as the main disconnect device, ensure that the socket-outlet is located/installed near the equipment and is easily accessible. ATTENTIONN Le cordon d`alimentation est utillsé comme interrupteur général. La prise de courant doit être située ou installée à proximité du matériel et être facile d`accès ඖ NEVER REMOVE THE BACK COVER Removal of the back cover should be carried out only by qualified personnel.
G G G NOTE This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
G G Before setting up the monitor, ensure that the power to the monitor and other attached devices are turned off. ଖ Notice: Stand & Screws are optional A. Connecting the stand 1. Place the monitor with its front facing downward on a soft cloth. 2. Assemble the Stand Base into the Stand Body in the correct direction using the included screws in the accessory box. Stand Body Stand Base FS4x10 screws 3. Once assembled take the monitor up carefully and face the front side. B.
G G G Rear Connection 1 2 3 4 5 6 7 8 9 10 11 12 13 1. SDI OUT 2. SDI IN 3. AV2 IN 4. AV1 OUT 5. AV1 IN 6. TRIGGER IN 7 & 8. AUDIO R&L (AV1 & AV2) 9. PC STEREO IN (VGA & DVI) 10. VGA 11. DVI 12. HDMI 13.
G G G Remote Controller(Optional) 1. POWER( ) Turns the power ON or OFF. There will be a few seconds delay before the display appears. 2. SOURCE Selects an input source. 3. AUTO Auto geometry adjustment in the RGB-PC source. 4. HOLD Stops the Trigger & Auto switching functions. 5. MUTE Mutes the sound. 6. MENU Activates and exits the On Screen Display. 7. EXIT Exits the On Screen Display. 8. VOL(ൖ & ൘) Increases or decreases the level of audio volume. 9.
G G G Bottom Key Control 1 2 3 4 5 6 7 8 9 1. SOURCE/ Selects an input source. Enters a submenu or accepts your selection in the OSD menu. 2. MENU Activates or exits the OSD. Moves previous menu or status in the OSD. 3 & 4. AUTO/̷ & ̵ Moves another option in the OSD. The AUTO/ź button is auto adjustment function in the VGA input. The up(̵) button is HOLD function and stop the Trigger & Auto switching functions. 5 & 6. ൖ VOL ൘ Adjust the volume or menu settings. 7. / I Turns the power on or off.
G G G OSD Menu Description All picture, sound settings and setup for the monitor can be adjusted in the OSD menu. (On Screen Display) To adjust the OSD screen: 1. Press the MENU button to enter the OSD menu. 2. Press the Ÿ/ź buttons to select the desired option. The selected option is highlighted. 3. Press the ൘ button to enter the submenu for adjusting items. 4. Change the value you wish to adjust by using the ረ/൘ buttons. 5. Press the ረ button to exit the submenu for adjusting items. 6.
G G G B. Picture/Sound Option Function Value Picture Mode Sets picture mode. See table below Color Tone Sets color tone. See table below Mute Mutes speaker sound. Off or On Volume Adjust the level of audio volume. 0 ~ 100 Size Display picture size. See table below Reduces noise of the picture. On or Off Activates the 3D comb filter. On or Off NR 1) 3D Comb 1) PC 2) See table below. 1) Unavailable in RGB-PC, DVI, HDMI and HD-SDI. 2) Only available in RGB-PC.
G G G Color Tone Cool Gives the white color a bluish tint. Normal Gives the white color a neutral tint. Warm Gives the white color a reddish tint. User To manually adjust the color tones(Red, Green, and Blue).
G G G C. PIP Option Function Value PIP Activates the PIP feature. Off or On Input Source Selects the input source for the PIP area. See table below PIP Mode PIP Size Position Enables 3 screen size.4:3 side by corner, 4:3 side by 4: 3, and full screen side by side. Selects the size of PIP screen. PIP, PBP1 or PBP2 Size1, Size2 or Size3 Selects the position of PIP screen. Right of Bottom, Left of Bottom, Left of Top and Right of Top.
G G G D. Setup Option Reset Function Value Resets the monitor settings to the factory default. English, French, Deutsch, Language Sets the language of the OSD menu. Italian, Spanish, Portuguese or Nederland OSD Tone Blue Screen Key Lock 1) Changes background of monitor menus. (e.g. input source & information) Displays a blue screen if the monitor receives no signal. Locks all buttons of the monitor. Note: Use remote controller to unlock.
G G G Trigger Option Function Trigger Enable Activates the trigger feature. Trigger Input Selects the input source for the Trigger. Buzzer Inactivated. Trigger Time Trigger Option Value Off or On Selects the amount of time, in seconds, that the monitor displays the trigger Input image. Selects the type of physical trigger input. AV1, AV2, RGB-PC, DVI, HDMI or HD-SDI 3 ~ 100 See table below. Selects the mode in which the monitor displays the Trigger Input.
G G G N/C(Normally Closed): The Trigger function is activated when the trigger cable is opened. N/O(Normally Opened): The Trigger function is activated when the trigger cable is closed. High: The Trigger function is activated when the trigger signal is DC 2~5[V]. Low: The Trigger function is activated when the trigger signal is DC 0~0.6[V]. Note: In this case, trigger port has high status electrically, so the trigger cable has to have ground(or earth) status to be activated.
G G G Wall mounting (Optional) The LCD monitor is suitable for wall mounting by using the VESA 100 standard wall mount (not included in the delivery). XWW XWW M4x10 screws ଖ Attention! You must use four M4x10 screws to assemble this monitor and the wall mount bracket. WARNING! If user use longer than M4x10mm, it may cause the damage on the unit. Please follow instructed bolt size & length.
G G ඖG Pin AssignmentsG G RED VIDEO 9 ͑ 2 GREEN VIDEO 10 SIGNAL CABLE DETECT 3 BLUE VIDEO 11 GROUND 4 GROUND 12 SDA(for DDC) 5 GROUND 13 H-SYNC.(or H+V SYNC.) 6 RED GROUND 14 V-SYNC. 7 GREEN GROUND 15 SCL(for DDC) 8 BLUE GROUND Pin 1 ͑ D-SUB ඖG Accessories 1. Power cord. 2. Power adaptor 3. User manual. 4. VGA(RGB-PC) cable. 5. Stand base & FS4x10 screws 3EA. 6. Trigger cable (Optional) 7. Stereo cable (Optional). 8. Remote controller (Optional). 9. Batteries (Optional).
G G G Power Consumption Mode Power Consumption Turned On < 21.6W Turned Off < 1W LED Indicator The power management feature of the monitor is comprised of two stages: Turned on(blue) and turned off(red).
G G G 21.5ˉ 21.5Ý Diagonal AM-TFT(Active-Matrix) Pixel pitch(mm): 0.24825(H) x 0.24825(V) Brightness: 250cd/m² LCD-Type (Typical) Contrast ratio: 1000:1 (Typical) Viewing angle: 170°/160°(H/V) Response time: 5ms (Typ., on/off) RESOLUTION (H x V) FREQUENCY 1920X1080@60Hz Horizontal: 31~80kHz, Vertical: 56~75Hz VIDEO (2ch input 1.0Vp-p, 75ȍ terminated, 1ch loop-through out) HDMI (High Definition Multimedia Interface) DVI (Digital Video Interface) INPUT SIGNAL VGA (RGB-PC) PC Stereo In.
G G G G (Unit: mm) G G G - 21 -G G
G G G WEEE Symbols Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.
MEMO
MEMO
G G G G G G G G
G G G G G G G G G G G G G G G G G G 300E State Route 17S, Mahwah, NJ 07430 USA G G G G G G G Property of L39ME0333 Rev.
